Loading ...
Loading ...
Loading ...
Push the SWAY BAR switch to activate the system. Push
the switch again to deactivate the system. The “Sway Bar
Indicator Light” (located in the instrument cluster) will
illuminate when the bar is disconnected. The “Sway Bar
Indicator Light” will flash during activation transition, or
when activation conditions are not met. The stabilizer/
sway bar should remain in on-road mode during normal
driving conditions.
WARNING!
Do not disconnect the stabilizer bar and drive on
hardsurfaced roads or at speeds above 18 mph (29
km/h); you may lose control of the vehicle, which could
result in serious injury. The front stabilizer bar en-
hances vehicle stability and is necessary for maintain-
ing control of the vehicle. The system monitors vehicle
speed and will attempt to reconnect the stabilizer bar
at speeds over 18 mph (29 km/h). This is indicated by a
flashing or solid “Sway Bar Indicator Light.” Once
vehicle speed is reduced below 14 mph (22 km/h), the
system will once again attempt to return to off-road
mode.
To disconnect the stabilizer/sway bar, shift to either 4H or
4L and push the SWAY BAR switch to obtain the off-road
position. Refer to “Four-Wheel Drive Operation” in this
section for further information. The “Sway Bar Indicator
Light” will flash until the stabilizer/sway bar has been
fully disconnected.
Sway Bar Switch
6
STARTING AND OPERATING 297
Loading ...
Loading ...
Loading ...