Loading ...
Loading ...
Loading ...
) Do not use reducers, adapters or switches for connection to the mains, since these could
overheat and cause burns.
) Regulations require that the appliance is earthed. The manufacturer declines all liability
resulting from failure to observe this regulation. ( fig.12 )
If the power cable must be replaced, use a cable having identical characteristics to the original
supplied by the manufacturer, suitable for the load and temperature (type T90°C). This is available
from After-sales service. Furthermore, the end of the power cable to be connected to the appliance
must have the Yellow-Green earth conductor 20 mm longer than the other conductors.
Refer to the table below for the size of the power cable
Type of cooktop Size
Only gas burners
3X0.50 mm
2
H05 V2V2-F
CLEANING
To maintain the cooktop in optimum condition, clean it regularly after each use, allowing it to cool
before cleaning.
Never remove the knobs from their seats
Enamelled parts
All enamelled parts should be cleaned with a sponge and soapy water or specific detergents. Never
use abrasive cleaning products. Dry thoroughly after cleaning.
Stainless steel top
The stainless steel top should be cleaned with a damp cloth and proprietary detergents commercially
available.
After rinsing, dry preferably with a chamois leather.
Grids
The enamelled panstand grids of the cooktop are dishwasher safe.
Stainless steel panstand grids may take on a bluish tinge on parts around the burners as a result of
the high temperatures. This effect can be reduced by using commercially available steel wool pads.
Burners
The burners, comprising two parts, can be removed and cleaned using suitable detergents. After
cleaning, dry the burners thoroughly and reposition them carefully in their seats.
In models with electric ignition, always check that the electrode “E” (fig. 13) is clean.
In models with safety device, clean the probe “T” (fig. 13) in order to allow regular operation of the
safety valve. Both the electrode and probe must be cleaned with care.
Upon completion of cleaning, replace the burners accurately in their seats.(see fig.13 )
To prevent damaging the electric ignition, avoid using it when the burners are not in place.
55
Loading ...
Loading ...
Loading ...