Loading ...
Loading ...
Loading ...
1-16 Seat, seatbelt and SRS airbags
WARNING
Fastening the seatbelt with the web-
bing twisted can increase the risk or
severity of injury in an accident.
When fastening the belt after it is
pulled out from the retractor, espe-
cially when inserting the connec-
tor’s tongue plate into the mating
buckle (on right-hand side), always
check that the webbing is not
twisted.
WARNING
Be sure to fasten both tongue plates
to the respective buckles. If the
seatbelt is used only as a shoulder
belt (with the connector’s tongue
plate not fastened to the connec-
tor’s buckle on the right-hand side),
it cannot properly restrain the wear-
er in position in an accident, possi-
bly resulting in serious injury or
death.
5-door models
The rear center seat belt is stowed in the
seat belt holder on the right side of the
cargo area.
1. Remove the tongue plate from the belt
holder and pull out the seatbelt slowly.
5-door models
2. For 5-door models, after drawing out
the seatbelt, pass it through the belt guide
as follows: First insert one edge of the belt
into the open gap in the belt guide; then
slide the rest of the belt in, so that the
whole belt fits inside.
Loading ...
Loading ...
Loading ...