Loading ...
Loading ...
Loading ...
11
About the ice and water dispenser. GEAppliances.com
To Use the Dispenser
Select CUBED , CRUSHED
or WATER .
Press the glass gently against the middle of the
dispenser pad.
The spill shelf is not self-draining. To reduce
water spotting, the shelf and its grille should be
cleaned regularly.
If no water is dispensed when the
refrigerator is first installed, there may
be air in the water line system. Press the
dispenser arm for at least two minutes to
remove trapped air from the water line
and to fill the water system. To flush out
impurities in the water line, throw away the
first six glassfuls of water.
CAUTION
Never put fingers or any
other objects into the ice crusher discharge
opening.
Locking the Dispenser
Press the LIGHT button
for 3 seconds to lock the
dispenser and control
panel. To unlock, press and
hold the button again for 3
seconds.
Dispenser Light
This button turns the light on
the dispenser on and off. The
light also comes on when the
dispenser pad is pressed. If
this light burns out, it should
be replaced with a 6 watt
12V maximum bulb.
Quick Ice
When you need ice in a
hurry, press this button to
speed up ice production.
This will increase ice
production for the following
48 hours or until you
press the button again.
Door Alarm
To turn the Door
Alarm on, press the
DOOR ALARM button
once. The ACTIVE light will
come on. To turn it off,
press it again. When the
DOOR ALARM is active, the
ACTIVE light will flash if you
open the door and beep
if you keep the door open
for more than 2 minutes.
The light goes out and the
beeping stops when you
close the door.
Spill Shelf
Loading ...
Loading ...
Loading ...