Loading ...
Loading ...
Loading ...
52
CARE AND CLEANING
S
F
C
Cap
Ignitor
Flame
spreader
Replacing the semi-rapid burner caps
Correct positioning of semi-rapid burner parts
Burner parts
y You can remove and clean these parts with hot soapy water or non-abrasive
detergents. Clean spills regularly before they become burnt on. Do not wash these
parts in a dishwasher.
y After cleaning, check that the burners and their flame spreaders are dry before
replacing correctly.
y It is very important to check that the burner flame spreader and the cap have been
correctly positioned. Failure to do so can cause serious problems.
y Check that the ignitor is always clean to ensure trouble free sparking. It must be
cleaned very carefully using a toothbrush and methylated spirits.
y Note: to avoid damage to the electronic ignition, do not try to light a burner without
all burner parts in place.
Replacing the burner parts
y Carefully replace the burner parts as per the following illustrations.
y Fit the flame spreader to the housing as shown below. Make sure the burner is not able
to rotate.
Check that:
y the ignitor is always clean to ensure trouble-free sparking
y the probe is always clean to ensure correct operation of the safety valves
y the flame spreaders are clean and the holes are not clogged
Note: both the ignitor and probe must be very carefully cleaned using a toothbrush
and methylated spirits.
Replacing the semi-rapid burners
Loading ...
Loading ...
Loading ...