User Manual Sony MDR-NC8 Noise Canceling Headphones

Documents for Sony MDR-NC8

The following documents are available:
User Manual Warranty Photos
MDR-NC8 photo
MDR-NC8 [US, ES] 4-431-885-12 (1)
Noise Canceling
Headphones
Operating Instructions
Manual de instrucciones
© 2012 Sony Corporation Printed in Malaysia
4-431-885-12(1)
MDR-NC8
(1)
2
3
4
How to use/Modo de uso
Installing a battery/Colocación de la pila
Connecting/Conexión
Turning on the power/Encendido
5
Wearing/Colocación
After use
Turn off the power of the headphones
Después del uso
Apague los auriculares
Tactile dot (on the left)
Punto táctil (a la
izquierda)
1
Unfolding the headphones/Desplegar los auriculares
Digital music player, etc.
Reproductor de música digital, etc.
English Noise Canceling Headphones
WARNING
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
The validity of the CE marking is restricted
to only those countries where it is legally
enforced, mainly in the countries EEA (European
Economic Area).
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Notes on use
What is noise canceling?
The noise canceling circuit actually senses
outside noise with built-in microphones and
sends an equal-but-opposite canceling signal to
the headphones.
Notes on the noise canceling function
Adjust the earpads so that they cover your
ears, otherwise noise canceling will not
function properly.
The noise canceling effect may vary
depending on how you wear the headphones.
Do not cover the microphone of the
headphones with your hands. The noise
canceling function may not work properly.
Microphone
After you turn on the power of the
headphones, you may hear a slight hiss. This
is the operating sound of the noise canceling
function, not a malfunction.
The noise canceling function works for noise
in the low frequency band primarily. Although
noise is reduced, it is not canceled completely.
The noise canceling effect may not be
pronounced in a very quiet environment, or
some noise may be heard.
When you use the headphones in a train or
a car, noise may occur depending on street
conditions.
Mobile phones may cause interference
and noise. Should this occur, locate the
headphones further away from the mobile
phone.
Notes on using on the airplane
Do not use the headphones when use of
electronic equipment is prohibited or when
use of personal headphones for in-flight
entertainment services is prohibited.
Notes on handling
Because the headphones are designed to fit
closely in your ears, forcing them against your
ears may result in eardrum damage. Avoid
using the headphones where they are liable
to be struck by people or other objects, such
as a ball, etc.
Pressing the headphones against your ears
may produce a diaphragm click sound. This is
not a malfunction.
Clean the headphones with a soft dry cloth.
Do not leave the plug dirty otherwise the
sound may be distorted.
OPEN
Be sure to consult a Sony dealer when the
earpads become dirty or damaged, or when
the headphones require repair work.
Do not leave the headphones in a location
subject to direct sunlight, heat or moisture.
Do not subject the headphones to excessive
shock.
Handle the driver units carefully.
If you feel drowsy or sick while using this
headphones, stop use immediately.
Notes on headphones
High volume may affect your
hearing. For traffic safety, do not
use while driving or cycling.
As headphones reduce outside sounds, they
may cause a traffic accident. Also, avoid
listening with your headphones in situations
where hearing must not be impaired, for
example, a railroad crossing, a construction site,
etc.
Note on static electricity
In particularly dry air conditions, noise or sound
skipping may occur, or mild tingling may be felt
on your ears. This is a result of static electricity
accumulated in the body, and not a malfunction
of the headphones.
The effect can be minimized by wearing clothes
made from natural materials.
If you have any questions or problems
concerning the system that are not covered
in this manual, please consult the nearest
Sony dealer.
Troubleshooting
No sound
Check the connection of the headphones and
the equipment.
Check that the connected equipment is
turned on.
Turn up the volume of the connected
equipment.
The noise canceling effect is not sufficient
The noise canceling function is effective in low
frequency ranges such as airplanes, trains, or
offices (near air-conditioning, etc.) and is not
as effective for higher frequencies, such as
human voices.
Turn on the headphones.
Distorted sound
Turn down the volume of the connected
equipment.
Power does not turn on
Check if the battery has expired (the POWER
indicator lights off) and the battery is inserted
in the correct orientation. Replace the battery
with a new one or reinsert the battery in the
correct orientation.
Specifications
General
Type Dynamic, closed
Driver units 30 mm, dome type (CCAW adopted)
Power handling capacity
50 mW
Impedance 17 Ω at 1 kHz (when the power is on)
19 Ω at 1 kHz (when the power is off)
Sensitivity 95 dB/mW (when the power is on)
98 dB/mW (when the power is off)
Frequency response 30 Hz – 20,000 Hz
Total Noise Suppression Ratio
1)
Approx. 10 dB
2)
Cord Approx. 1.2 m (47 1/4 in) OFC Litz cord
Plug Gold-plated L type stereo mini plug
Power source DC 1.5 V, 1 × R03 (size AAA) battery
Mass Approx. 170 g (6.0 oz) including battery,
not including cord
Battery life
Sony alkaline battery LR03 SIZE AAA:
Approx. 80 hours
3)4)
Sony manganese battery R03 SIZE AAA:
Approx. 40 hours
3)4)
Notes
The supplied battery was included in the package during
manufacturing (as a convenience to the user), it is possible
that the battery life may be depleted by the time of purchase.
The actual life of the supplied battery may be shorter than the
standard time described in this manual when using a fresh
battery.
Able to use as a regular headphones even when the POWER
switch is set to OFF.
When the battery is low
Replace the battery with a new one when the POWER indicator
blinks or lights off.
Included items
Headphones (1), Plug adaptor for in-flight use
5)
(1), Sony R03
(SIZE AAA) battery (1), Operating Instructions (1)
1)
Under the Sony measurement standard.
2)
Equivalent to approx. 90% reduction of energy of sound
compared with not wearing headphones.
3)
1 kHz, 0.1 mW + 0.1 mW output
4)
Time stated above may vary, depending on the temperature
or conditions of use.
5)
May not be compatible with some in-flight entertainment
services.
Design and specifications are subject to change without notice.
Loading ...
Loading ...
Loading ...