5443 User Manual

Loading ...

Attaching basket handle to basket...

Before using the deep fryer, you will need to attach the basket handle to the basket.

Follow these steps:

1. Hold the basket in one hand and the basket handle in your other hand. You will

be placing the pegs, which are at the ends of the two basket handle bars, into the

twoholesinthebasketbracket(Fig.E).

2. While holding the pegs near the peg holes, tilt the handle inward before attempting

toplacethepegsintheirholes.(Youwillnotbeabletotthesecondpegintoits

holeifthehandlebarsarepositionedtooclosetothebracket.)

3. Next, place one of the pegs in one of the peg holes. Then squeeze the handle bars

togetherandttheoppositepegintheotherpeghole(Fig.F).

4. While continuing to squeeze the handle bars together and keeping the pegs in the

holes, rotate the handle towards the basket rim, allowing the handle bars to snap

intothetabsonthebasketbracket(Fig.G).Thehandleisnowinthelockedposi-

tion.

For instructions on how to insert and position basket in fryer, see step 3,

page 5.

How To Use

To ll with oil...

1. Open the deep fryer cover.

2. If the frying basket is in the fryer, remove it and set it aside.

3. Fill the removable pot with cooking oil or shortening up to the maximum

oil level line (MAX) which is located on the inside of the removable pot

(Fig.H).Useeight,8-ouncecupsofcookingoilorfourpoundsofshortening.The

amountofoilintheremovablepotmustalwaysbebetweentheMINandMAX

levelmarkingsinsidetheremovablepot.NeverexceedtheMAXlevelmark.

To preheat...

1. Close the fryer cover.

2. Attach the cord to the unit by aligning the magnetic plug end of the cord assembly

withthetwoelectricalpinslocatedintherecessedareaofthefryerbase(Fig.I).

When properly aligned, the plug will magnetically attach itself to the appliance. For

proper connection, the magnetic plug end must be parallel with the countertop

(Fig.J).

Important: The magnetic cord was designed to detach easily from the fryer. As

a result, if it is bumped or touched during use, it could possibly detach causing

the unit to stop heating. Avoid contact with cord during operation. If contact

occurs, verify that the cord is still properly connected.

3. Plug cord into a 120v AC electrical wall outlet only. Turn the adjustable temperature control

(Fig.A,Page3)tothedesiredtemperature(seepage7forpropercookingtempera-

tures).Therecommendedsettingformostfryingis375°.

MAX

MIN

Fig. G

Tabs

Fig. E

Handle

Peg

Handle bar

Basket

bracket

Peg

hole

Handle bars

Peg

Peg hole

Fig. F

Fig. H

Fig. I

Electrical pins

Recessed

area

Magnetic

plug end

Loading ...

User Manual - Page 4