Loading ...
Loading ...
Loading ...
Page 4 • JL Audio, Inc., 2017 Continued on Next Page
STEP 8
Slide a factory Torx bolt through the hole in a
Short Bracket, and partially thread it into the
front factory hole.
Align the Short Bracket horizontally, with the
slotted end facing inward, as shown.
Mark the location of the Short Bracket on the
carpet.
STEP 7
Remove the storage tray bracket from the
vehicle.
STEP 6
Remove the two Torx bolts and two nuts that
secure the storage tray bracket to the vehicle.
STEP 5
Lift up on the storage tray, and remove it from
the vehicle. Pictured is the storage tray bracket.
STEP 4
Remove the seven screws and bumpers from
the top of the storage tray.
STEP 3
Loosen the two clips from each side of the
under-seat storage tray.
STEP 2
Lift the rear seat. Loosen the straps around
the jack tools, and remove the tools from the
vehicle.
STEP 1
Empty the rear seat area.
SB-GM-COCREW2G/10TW3 INSTR_SKU# 011474
Loading ...
Loading ...