Loading ...
Loading ...
Loading ...
DESCRIPTION
The Model 99A00 OmniTouch 7 Touchscreen with Video is a colorful
network touchscreen interface for Leviton Security & Automation
controllers. The OmniTouch 7 features graphics for control of lights and
small appliances, to monitor and adjust security and temperatures, pool
and spa settings, ventilation, audio distribution, home theater equipment,
surveillance video, and other essential elements controlled by a Leviton
home automation system.
PLANNING
The OmniTouch 7 is an IEEE 802.3af compliant Power over Ethernet
(PoE) Powered Device (PD). The OmniTouch 7 receives its power over
the same cable that connects the OmniTouch 7 to the network, using a
Power Sourcing Equipment (PSE) device, such as a PoE network switch,
hub, or power injector.
It is very important to plan where the OmniTouch 7 Touchscreen will be
installed. Each OmniTouch 7 Touchscreen must be installed within 100
meters (328 feet) of a Power Sourcing Equipment (PSE) device.
In selecting a place to mount the touchscreen, be sure to avoid an area
where studs, plumbing, or electrical wiring may be located behind the
wallboard. Use a stud finder or probe to locate a suitable mounting
position. The mounting area should be at least 2” deep. It should be
mounted so that the display is at or slightly below eye level.
Wiring Requirements
When connecting an OmniTouch 7 to the network, a Cat-5 (4-pair) cable
is required for operation. Run the Cat-5 cable between the location of
the PoE network switch, hub, or power injector and the location of the
OmniTouch 7.
The maximum distance between the Power Sourcing Equipment (PSE)
device and the OmniTouch 7 and is 100 meters (328 feet). Terminate
both ends of the Cat-5 cable with 8-position modular connectors to make
a standard straight through network patch cable.
Page 3
WEB VERSION
Loading ...
Loading ...
Loading ...