Loading ...
V1 ENGLISH 18-0679
7 Secure the charger outlet to
the wall box with the two
long screws (provided).
8 Secure the wall plate to
the charger outlet with
the two short screws
(provided).
9 Restore power by
replacing the fuse or
turning on the circuit
breaker. The charger
outlet is ready to use,
and the LED nightlight
turns on automatically.
USING THE CHARGING OUTLET
• To charge USB devices (such as mobile
phones or tablets), plug USB cables into the
USB ports on the charger outlet and into the
USB ports on the devices.
Note: You can charge a single device with a
maximum of 4.8A or two devices with a maximum
of 2.4A each. See the documentation that came
with your devices for charging requirements.
LED NIGHTLIGHT CONTROL
1 The default setting of the LED nightlight is High.
2 Touch the control panel to cycle the nightlight
brightness from High to Low to O.
SPECIFICATIONS
Dimensions (H × W × D)
With plate:
1.9 × 3 × 4.7 in. (47.6 × 76 × 120 mm)
Without plate:
1.9 × 1.7 × 4.2 in (47.6 × 44 × 106 mm)
Electrical
Receptacle Rating: 15Amp, 125VAC
USB Rating: Maximum 2.4A per USB port, total
4.8A for two ports, 5V DC
Line Voltage: 125VAC @ 60 Hz
Wire Terminals: #12 or #14 AWG
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. This equipment has been
tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment o and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved
Made in China