Sony WH-CH700N Wireless Noisecanceling Headphone

Help Guide - Page 71

For WH-CH700N.

PDF File Manual, 109 pages, Read Online | Download pdf file

WH-CH700N photo
Loading ...
Loading ...
Loading ...
Help Guide
Wireless Noise Canceling Stereo Headset
WH-CH700N
Switching the sound quality mode
The sound quality is set to the “Priority on sound quality” mode as the default setting.
When using an SBC, AAC, aptX, or aptX HD compatible device, use with the “Priority on sound quality” mode.
If the connection is unstable, such as when producing only intermittent sound, select the “Priority on stable
connection” mode.
Sound quality and indicator (blue) of each mode
When you switch the sound quality mode, the indicator (blue) flashes to show the current sound quality mode.
“Priority on sound quality” mode: 3 times
- - - -
SBC, AAC, aptX, or aptX HD is selected automatically.
“Priority on stable connection” mode: 1 time
SBC
To check the sound quality mode
While the headset is powered on, press and hold the
button, then press the + or - button within 2 seconds (before
the power is turned off). The indicator (blue) will flash 3 times (“Priority on sound quality” mode) or 1 time (“Priority on
stable connection” mode). You can switch and check the sound quality mode setting with the "Sony | Headphones
Connect" app.
Note
When you turn on the headset by pressing only the
button, the indicator (blue) flashes two times to indicate that the power is
on, but the headset does not indicate the sound quality mode with the indicator (blue) flashing.
The playback time may become shorter depending on the sound quality and the conditions under which you are using the
headset.
Depending on the ambient conditions in the area where you are using the headset, intermittent sound may still occur even if the
“Priority on stable connection” mode is selected.
4-729-821-11(2) Copyright 2018 Sony Corporation
Turn on the headset by pressing the button for more than 2 seconds while holding the + or - button
down.
To select “Priority on stable connection,” turn on the headset while holding the - button down.
To select “Priority on sound quality,” turn on the headset while holding the + button down.
1
71
Loading ...
Loading ...
Loading ...