Loading ...
Loading ...
Loading ...
28
Optional Components
Make a digital
recording from CD
to MD
Connect an optical cable.
Listen to the analog
sound of a
connected VCR
Connect the audio cords.
Press 5.1CH/VIDEO (MD)*
repeatedly until “VIDEO”
appears.
Listen to the analog
sound of the
connected MD deck
With the system turned off,
press 5.1CH/VIDEO (MD)*
while holding down ENTER.
This switches the “VIDEO”
function to “MD”. Once you
enable the “MD” function,
just press 5.1CH/VIDEO
(MD)*.
Then connect the audio cords.
Press 5.1CH/VIDEO (MD)*
repeatedly until “MD”
appears.
Make an analog
recording from MD
onto a tape
Connect the audio cords.
Press 5.1CH/VIDEO (MD)*
repeatedly until “MD”
appears.
* VIDEO (MD) for MHC-MG110 or on the remote
Editing operations while labeling
To Press
Cancel the operation [Esc]
Move the cursor [T] or [t]
Erase the character or
space at the cursor
position
[Delete]
Erase the character or
space preceding the
cursor
[Back Space]
Operating the system
through the keyboard
You can operate the system without using the
buttons and controls on the unit or on the
remote.
As the keyboard substitutes
for the following functions
Press
CD PLAY [F5]
CD PAUSE [F6]
CD STOP [F7]
DISC ACCESS (DISCt) [F8]
TUNER/BAND [F9]
– . [F10]
> + [F11]
DISPLAY [F12]
Hooking up the optional
A/V components
You can connect a digital or an analog
component to this system.
To the audio output jacks of an MD deck,
a VCR, etc.
To the digital input jack of a digital component
To Do this
Labeling titles through the keyboard
(continued)
Loading ...
Loading ...
Loading ...