Loading ...
Loading ...
Loading ...
13
Please read this manual carefully. In addition to basic installation and operating
instructions, it provides valuable information on various system configurations
as well as general information that will help you get optimum performance
from your system. Please contact your authorized Michi dealer for answers
to any questions you might have. In addition, all of us at Michi welcome your
questions and comments.
Save the shipping carton and all enclosed packing material for future use.
Shipping or moving the amplifier in anything other than the original packing
material may result in severe damage to your audio components.
If included in the box please complete the owner’s registration card or register
online. Also be sure to keep the original sales receipt. It is your best record
of the date of purchase, which you will need in the event warranty service
is ever required.
Placement
The S5 and M8 generate heat as part of its normal operation. The heatsinks
and ventilation openings in the amplifier are designed to dissipate this heat.
There should be 50 cm (20 inches) of clearance around the chassis and
reasonable airflow through the installation location to prevent the amplifier
from overheating.
Remember the weight of the amplifier when you select an installation location.
Make sure that the shelf or cabinet can support it. We recommend installing the
S5 and M8 on furniture designed to house audio components. Such furniture
is designed to reduce or suppress vibration which can adversely affect sound
quality. Ask your authorized Michi dealer for advice about component furniture
and proper installation of audio components.
The S5 and M8 are supplied with an RR-RH6 remote control and must be
placed where the infrared signal from the remote can reach the front panel
Remote Sensor.
Cables
Be sure to keep the power cords, digital signal cables and analog audio signal
cables in your installation away from each other. This will minimize the chance
of the analog audio signal cables picking up noise or interference from the
power cords or digital cables. Using only high quality, shielded cables will
also help to prevent noise or interference from degrading the sound quality
of your system. If you have any questions see your authorized Michi dealer
for advice about the best cable to use with your system.
The RR-RH6 Remote Control
Operations with the remote control are described in this manual showing the
function keys with encircled letters.
Remote Control Batteries
Two AAA size batteries must be installed before the remote control can be
used. To install the batteries, follow the steps as below:
1. Lift the ribbon under the remote control and remove it out of the box.
Remote Control
Battery
(if included)
Hex Tool
USB Flash Drive
2. Remove the screw on the back of the remote using the hex tool provided
with the remote. Use only the hex tool supplied to avoid damaging the
attaching screw.
3. Install the batteries as shown in the illustration in the battery well (Figure
2). Please note there are negative and positive marks shown on the battery
cover (Figure 1). Reassemble the battery cover and tighten the screw then
test the control for proper operation.
Figure 1 Figure 2
When the batteries become weak the remote control won’t operate the device
consistently. Installing fresh batteries should eliminate the problem.
NOTE: Use only the tool supplied with the unit to remove the screw to
avoid damage to the hex screw.
NOTE: Do NOT over-tighten the screw to avoid damage to the screw or
remote control.
AC Power and Control
AC Power Input
-
Your amplifier is configured at the factory for the proper AC line voltage in the
country where you purchased it (either 120 volts AC or 230 volts AC with a
line frequency of either 50 Hz or 60 Hz). The AC line configuration is noted
on a decal on the back panel.
NOTE: Should you move your amplifier to another country, it is possible
to reconfigure your amplifier for use on a different line voltage. Do not
attempt to perform this conversion yourself. Opening the enclosure of
the amplifier exposes you to dangerous voltages. Consult a qualified
service person or the Michi factory service department for information.
NOTE: Some products are intended for sale in more than one country
and as such are supplied with more than one AC cord. Please only use
the one appropriate for your country/region.
Because of its relatively high power rating, the amplifier can draw considerable
current. Therefore, it should be plugged directly into a polarized wall outlet using
the supplied cable or other high current compatible cable as recommended
by your authorized Michi dealer. Do not use an extension cord.
If you are going to be away from home for an extended period of time such as
a month-long vacation, it is a sensible precaution to unplug your amplifier (as
well as other audio and video components) while you are away.
Loading ...
Loading ...
Loading ...