Loading ...
Loading ...
Loading ...
Maintaining Water and
DustResistance
This device is rated IP67 using the Ingress
Protection rating system.
Your device has been tested in a controlled
environment and shown to be water and dust
resistant in certain circumstances (meets
requirements of classification IP67 as described by
the international standard IEC 60529 - Degrees of
Protection provided by Enclosures [IP Code]; test
conditions: 15-35°C, 86-106 kPa, 1.0 meters, for
30minutes). Despite this classification, your device
is not impervious to water damage in any situation. It
is important that all compartments are closed tightly.
Follow these tips carefully to prevent damage to the
device.
•
Whenever your device gets wet, dry it thoroughly
with a clean, soft cloth.
•
Do not expose the device to salt water or ionized
water, or to water over 1.0 meters deep for more
than 30 minutes. If your device is exposed to
fresh water, dry it thoroughly with a clean, soft
cloth. If the device is exposed to any liquid other
than fresh water, rinse the device with fresh water
immediately and dry it thoroughly with a clean,
soft cloth. Failure to rinse the device in fresh water
and dry it as instructed may cause the device to
suffer from operability or cosmetic issues.
•
Do not expose the device to water at high
pressure.
•
If the device is dropped or receives an impact,
the water and dust resistant features of the device
may be damaged.
•
The touchscreen and other features may not work
properly if the device is used in water or in other
liquids. [040616]
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall/USB Charger (charging head
and USB cable) is included with the device for
charging the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Note: It is recommended you fully charge the battery
before using your device for the first time.
Caution: Use only charging devices and batteries
approved by Samsung. Samsung accessories are
designed for your device to maximize battery life.
Using other accessories may invalidate your warranty
and may cause damage.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
outlet.
3. When charging is complete, unplug the charging
head from the outlet and remove the USB cable
from the device.
Caution: Failure to unplug the wall charger before you
remove the battery can cause damage to the device.
6
Getting Started Assemble Your Device
Loading ...
Loading ...
Loading ...