Loading ...
Loading ...
Loading ...
Final Drive Oil u Changing Final Drive Oil
70
Maintenance
Changing Final Drive Oil
1.
Place your motorcycle on the side stand
on a level surface.
2.
Place a drain pan under the drain bolt.
3.
Remove the oil fill hole cap, O-ring, drain
bolt, and sealing washer to drain the oil.
4.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
5.
Fill the final gear with the recommended
oil.
2
P. 43
6.
Check the oil level. It should be flush
with the lower edge of the oil fill hole.
7.
Install a new O-ring onto the oil fill hole
cap. Tighten the oil fill hole cap.
8.
Check that there are no oil leaks.
Oil fill
hole cap
Lower edge
Sealing washer
Drain bolt
O-ring
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
Required oil: 5.4 US oz (160 cm
3
)
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
Loading ...
Loading ...
Loading ...