SC6X1 User Manual

Loading ...

Using The Steam Cleaner

WARNING: Do not open the Boiler Cap until there is no steam being release

from the Steam Gun. If the Boiler Cap is opened while there is hot steam and

pressure in the Boiler severe burns and injury can occur. If the Boiler Cap is

turned and steam/pressure start to escape from the Steam Cleaner, unplug the

Steam Cleaner from the power outlet and let the unit cool down for at least

15minutesbeforeattemptingtorellorusetheSteamCleaner.

When water in the boiler runs out, steam will stop emitting from the

SteamCleaner.TorelltheBoilerwithwater,followthestepsbelow:

• Switch off the Steam Cleaner by depressing the Power Switch and

unplug the appliance from the power outlet.

• Carefully and slowly turn the Boiler Cap counter-clockwise. If a hissing

sound is heard, residual steam and pressure remain in the Boiler. Wait

until the last of the steam and pressure escapes and the hissing stops

before removing the Boiler Cap.

• Take care of where the Boiler Cap is placed as the underside of the

cap is very hot. Ensure there are no children present who may pick

up the hot cap and cause burns to themselves.

• AllowtheSteamCleanertocoolforatleast5minutesbeforerelling

with water.

• RelltheBoilerwithamaximumof1.2litres(2pints)ofwaterusing

theFillerFunnel.(Note:onlyusetheFillerFunnelsupplied.Itsnozzle

is made from a heat resistant material to prevent it from melting when

llingahotboiler.Otherplasticfunnelscanmeltandbecomewelded

to the inside of the boiler spout, voiding the product’s warranty).

• Beextremely carefulwhen relling, as the interior of theBoileris

very hot. Water may spurt out as hot water or hot steam causing

burns.

• DonotoverlltheBoiler,excesswaterintheBoilerwillbeushed

outoftheunit,resultinginwetoorsorwetsurfaceswhencleaning.

DrysteamwillonlyemitiftheBoilerisnotoverlled.

• Replace the Boiler Cap by turning it clockwise. Do not over-tighten

theBoilerCap,ngertightissufcient.

• Plug the appliance into a power outlet.

• Turn on the Power Switch.

• The Steam Cleaner will heat up, produce steam and the Boiler will

become pressurised.

• When the green Steam Ready Light turns on the Steam Cleaner is

ready to use. Note: the green Steam Ready Light may turn on and off

during use, this is normal and not a fault.

• If using cold water, heating time is about 6-7 minutes. Using hot water

will reduce the heating time.

Loading ...

User Manual - Page 14