Loading ...
Loading ...
Loading ...
Safety information _5
appliances.
• Do not plug several
appliances into the same
multiple power board.
The refrigerator should
always be plugged into its
own individual electrical
outlet which has a voltage
rating that matched the
rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fi re hazard from
overheated wires. If the wall
socket is loose, do not insert
the power plug.
- There is a risk of electric
shock or fi re.
• Do not use a cord that
shows cracks or abrasion
damage along its length or
at either end.
• Do not bend the power cord
excessively or place heavy
articles on it.
• Do not use aerosols near the
refrigerator.
- Aerosols used near the
refrigerator may cause an
explosion or fi re.
• Do not install this appliance
in a location where gas may
leak.
- This may result in an electric
shock or fi re.
• The installation or any
service of this appliance
is recommended by a
qualifi ed technician or
service company.
- Failing to do so may result
in an electric shock, fi re,
explosion, problems with the
product, or injury.
• This refrigerator must be
properly installed and
located in accordance with
the manual before it is used.
• Connect the power plug in
proper position with the cord
hanging down.
- If you connect the power
plug upside down, wire can
get cut off and a cause fi re
or an electric shock.
• Make sure that the power
plug is not squashed or
damaged by the back of the
refrigerator.
• When moving the
refrigerator, be careful not
to roll over or damage the
power cord.
- This constitutes a fi re
DA99-03417A-16.indd 5DA99-03417A-16.indd 5 14. 3. 24. 3:1514. 3. 24. 3:15
Loading ...
Loading ...
Loading ...