Loading ...
Loading ...
Loading ...
29
12
12.2
www.fhiaba.com ∙ [email protected] ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
Troubleshooting Guide
Malfunction indications appearing on the display
Display message Malfunction description
Power Failure!! Prolonged interruption of electrical power
the appliance resumes work automatically, the display shows the warmest temperatures
achieved
Door Fridge OPEN Fridge door open
the message appears after few minutes from the door opening
TriMode OPEN Freezer door open
the message appears after few minutes from the door opening
Replace lter Replace lter cartridge
message appears when only 30% of lter capacity is left
Fridge too warm Fridge too warm
see Troubleshooting Guide
Fridge too cold Fridge too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Fresco too warm Fresco Compartment too warm
see Troubleshooting Guide
Fresco too cold Fresco Compartment too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
TriMode too warm Freezer too warm
see Troubleshooting Guide
TriMode too cold Freezer too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Error Code... Functional problems
call Customer Care who may help you to salve the problem or put you in contact with the
nearest Service Agent
On average, the Ice Maker produces approximately 10 cubes of ice
every two and half hours.
When the Ice Maker is started for the rst time, it is recommended to
empty the rst full tray of ice cubes.
If the refrigerator was switched off for more than one month or if the car-
tridge was not changed for more than six months, it could be necessary
to replace the lter cartridge.
Contact a plumber or a water treatment expert to make sure that the
problem is not due to the water supply.
If the ice is not used frequently, it is possible that blocks of ice may form.
It is recommended to remove the block of ice cubes and then let the
Ice Maker ll the ice tray again.
Make sure that the Ice Maker is on (Icemaker button
on).
To switch on the Ice Maker press the button.
Make sure that the appliance is connected to the water supply.
The Ice Maker does not produce
sufcient amounts of ice
The ice has an unusual avor or color
If the unit you purchased was used as a show-
room model it may be in a special energy-saving
mode called Demo Mode where the appliance
appears to be operating (lights work and false
temperatures are displayed) but no cooling actu-
ally takes place. If you suspect your appliance is
in Demo Mode please contact your point of pur-
chase for assistance with disabling this feature.
The ice cubes freeze into one block
The Ice Maker does not work
Loading ...
Loading ...
Loading ...