Loading ...
Loading ...
Loading ...
8
Attaching the Table-Top Stand
• Refer to the supplied stand leaflet for proper attachment.
• For best picture quality, do not expose the screen to direct illumination or sunlight.
1 Place the TV with its screen facing down on a level and stable surface covered with
a thick and soft cloth.
2 Fix the TV to the stand according to the arrow marks that guide the screw holes
using the supplied screws.
• To detach the Table-Top Stand from the TV, remove the three screws guided by the arrow mark
on the Table-Top Stand. Do not remove any other screws.
• Hold the Table-Top Stand with one hand to avoid it dropping when attaching.
• This TV is very heavy, so two or more people should place the TV onto thick and soft cloth.
• If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).
• Be sure to securely tighten the three supplied screws, otherwise the TV may fall down.
• Use an appropriate screwdriver to attach the screws tightly without damaging the screw head.
Thick and soft cloth
Screw (+PSW 5 x 16)
(Supplied)
* Be careful not to hit the Table-Top Stand against the edge of
the surface when attaching it.
Loading ...
Loading ...
Loading ...