Loading ...
Loading ...
Loading ...
CATALYTIC FAN COVER
CAUTION! Do not clean the catalytic
surface with oven sprays, abrasive
cleaning agents, soap or other
cleaning agents. This will damage the
catalytic surface.
The fan cover with a catalytic coating is self-
cleaning. It absorbs fat which collects on the walls
while the oven works.
To support the self-cleaning procedure, heat the
empty oven on a regular basis.
1. Remove all the accessories from the oven.
2. Clean the oven floor with warm water and
washing up liquid, then dry it.
3. Set the function
.
4. Set the oven temperature to 250 °C and let the
oven operate for 1 hour.
5. When the oven is cold, clean it with a soft and
wet sponge.
Spots or discolouration of the catalytic surface
have no effect on catalytic properties.
HOW TO REMOVE AND INSTALL: DOOR
The oven door has two glass panels. You can
remove the internal glass panel to clean it.
CAUTION! Do not use the oven
without the glass panels.
The direction in which you open the
door depends on your oven model.
You open the door from the right side
in some models and from the left side
in others.
Step 1 Press the buttons at the sides of the
door trim (A) on the upper cover and
pull it upwards to remove it.
A
Step 2 Hold the inner glass B tightly with
both hands and slide it upwards to
remove it from its initial position.
Make sure that you tightly hold glass
B to prevent the glass from falling.
Step 3 Clean the door with a wet sponge
and rub it dry with a soft cloth. Do
not use steel wool, acids or abrasive
cleaning agents because they can
damage the surface.
B
24
Loading ...
Loading ...
Loading ...