Loading ...
Loading ...
Loading ...
Note
Auto power off is not available in the following situations.
When recording data to media
When shooting movies, or shooting in time-lapse capture mode
During movie playback
When Wi-Fi connection is being established, Wi-Fi remote control is connected, an image is being
uploaded to a smartphone, or live streaming
HDMI connection is being made. (FDR-X3000/HDR-AS300)
Supplying power from a connected USB device
Connecting a mass storage device
IR remote is set to ON. (FDR-X3000)
In the following cases, even if you have selected
or in the auto power off function, the
time that elapses before the power turns off will be extended.
While adjusting the menus.
While playing back still images
[65] Changing the Settings
Camera settings
Switching NTSC/PAL
You can select the NTSC/PAL setting, depending on the TV system of the country or region where you
use the camera.
Press the UP button or DOWN button to select (Camera Settings) - (Auto
power off) - setting value, then press the REC/ENTER button.
(Turns the power off after about 20 seconds)
(Turns the power off after about 60 seconds)
(Does not turn off automatically)
2
Press
the MENU button.
1
Press the UP button or DOWN button to select (Camera Settings) -
/ (Switching NTSC/PAL), then press the REC/ENTER button.
(Switches the camera from NTSC to PAL)
(Switches the camera from PAL to NTSC)
When you try to change the current setting, the confirmation screen appears. Go to step 3.
2
Press
the UP button or DOWN button to select
, then press the REC/ENTER
3
Loading ...
Loading ...
Loading ...