Loading ...
Loading ...
Loading ...
© Pro-Ject Audio Systems · Pro-Ject SIGNATURE 10 · Revision 2015.07.14
9
c) Headshell installation
Insert the headshell (13) into the front of the tonearm tube. Connector pin must be oriented into the groove
in the tonearm tube. Secure the headshell by screwing the locknut clockwise.
d) Counterweight installation
Put the counterweight (7) on the support rod. Tighten the locking screw gradually and put the shaft entry into
thread groove. Tighten the locking screw. A correction of counterweight’s weight is possible by the additional
counterweight which is tightened by the set screw.
Loading ...
Loading ...
Loading ...