Loading ...
Loading ...
Loading ...
© Pro-Ject Audio Systems · Pro-Ject SIGNATURE 10 · Revision 2015.07.14
16
Step 3:
Put the anti-skating sliding mechanism on the end of the anti-skating support rod. The anti-skating thread
should fit into the groove in the tonearm.
Be careful when handing the anti-skating thread in order to avoid damaging it.
Step 5:
Anti-skating force adjustment:
Adjust the anti-skating force by positioning the weight on the appropriate groove of the anti-skating sliding
mechanism. Anti-skating downforce should be adjusted in correspondence with the tonearm downforce as
follows:
Tonearm downforce: Anti-skating groove:
Lower than 13 mN or 1.3 grams 1st groove from bearing
13–18 mN or 1.3–1.8 grams 2ndgroove from bearing
18–25 mN or 1.8–2.5 grams 3rd groove from bearing
Loading ...
Loading ...
Loading ...