Loading ...
Loading ...
Loading ...
11
Clearing blockages
B
A
C
D
Check tools are clear
of blockages.
Wand and hose
A Remove wand by pressing
hose release buttons and
sliding hose off wand.
Check inside wand and
hose for blockages.
B Press lower hose release
button at front of machine
and slide hose out from
the rear, holding lower
cord hook.
U-bend inspection
C Tilt machine forward, slide
out U-bend, and check
inside for blockages.
Airway inspection
D Squeeze valve release
buttons and check inside
for blockages.
CAUTION
• Turn power off and unplug
before checking for
blockages. Failure to do so
could result in electric
shock or personal injury.
•If any part of your machine
becomes blocked, it may
overheat and then
automatically shut off.
Unplug machine and leave
to cool down for at least
60 minutes.
•Please note: Clearing
blockages is not covered
by your machine’s
limited warranty.
•Beware of sharp objects
when clearing blockages.
•Refit all parts of the
machine before using it.
•If you hear a loud
‘racheting’ noise it
means the brushbar
is obstructed.
•The ‘ratcheting’ noise
may also occur if your
carpet or area rug is not
adequately attached to
the floor. If this happens,
you should vacuum in
bare floors mode.
Clearing blockages
DC14 wand
www.dyson.com
18690_DC14_US_OPS_MAN 8/23/07 9:53 AM Page 11
Loading ...
Loading ...
Loading ...