Loading ...
Loading ...
Loading ...
120v
LITHIUM-ION
TM
17
– Maintain the sharpness of the blade
when cutting grass. If the blade has worn
excessively and become pitted and blunt,
it should be replaced or sharpened. The
sharpness of the blade will aect the
performance of the lawn mower.
1. Hold the blade and unscrew the blade bolt
counter-clockwise using a wrench. Remove
the blade.
2. Fit a new blade or re-sharpen the blade.
Place the blade on the two studs on the blade
ange with angled ends pointing up in the
direction of the power head and then replace
the bolts. Make sure the blade is correctly
located, and then rmly tighten the bolt with
a torque of 26-35 ft. lb. (35-50 N m). Do not
over tighten. The up turn of the blade must
project into the motor compartment.
Battery Maintenance:
Use the following procedures to enable optimum
usage of the battery:
1. Protect the battery against moisture and
water.
2. Store the battery only with in a temperature
range from 31
˚
F to 113
˚
F. As an example,
do not leave the battery in the lawn mower in
direct sunlight.
3. Clean the battery occasionally with a soft,
clean and dry brush.
4. If you do not use the product for a long time,
please charge and discharge the battery pack
once every 6 months.
Storage and transport
After cleaning the unit thoroughly, store it in a dry
room and allow the motor to cool down.
1. Release the Handle Quick release levers,
and fold the handles down.
2. Position the lower handle lock pin into the
mower bracket. Lock the handles in place by
closing the Quick release handle.
3. The machine can be stored at. (See Fig. 25)
NOTE:
Remove the safety key and battery packs. Ensure
cables are not trapped when folding/unfolding
the handle. If stored vertically –Make sure it is
position in a corner so that the blade is facing
inwards to a wall and it is secure to prevent
accidentally falling over.
Transport
Use the original packaging to ship whenever
possible.
Loading ...
Loading ...
Loading ...