Loading ...
Loading ...
Loading ...
120v
LITHIUM-ION
TM
13
RESIDUAL RISKS
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
- Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
- Injuries and damage to property due to
broken application tools or the sudden impact
of hidden objects during use.
- Danger of injury and property damage
caused by ying objects.
Warning!
This product produces an
electromagnetic eld during operation! This eld
may under some circumstances interfere with
active or passive medical ivmplants. To reduce
the risk of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!
ASSEMBLY
Unfold the handle
1. Rotate the handle quick release levers to
release the operation handle. (See Fig. 5).
2. Rotate the handle and then position the lower
handle lock pin into the mower bracket - one
of the three angle positions. (See Fig. 6)
3. Lock the handle in place by closing the quick
release levers- make sure that the handle is
securely locked in position. (See Fig. 7)
Fitting cable clips
Locate the cable into the cable clip and then clip
securely to the handle. (See Fig. 8)
Assemble grass bag and t it onto the mower
1. Find the grass bag for assemble. (See Fig. 9)
2. Lift the rear ap with one hand and locate the
grass bag onto the hooks. Release the rear
ap to secure the grass bag in position. (See
Fig. 10)
Installing the mulching plug
NOTE:
Switch o the tool and make sure that the
blade has stopped completely.
1. Lift the rear ap with one hand and push the
mulching plug into the rear discharge chute
until it is locked in place. Make sure that the
mulching plug is locked in position.
(
See Fig.
11
)
.
2. Release the rear ap, it will close back to
cover the mulching plug.
3. If you want disassemble the mulching plug,
hold the handle of the mulching plug, press
down the hook with your nger, meanwhile lift
it upward slightly and pull it out.
Installing the side discharge chute
NOTE:
Switch o the tool and make sure that the
blade has stopped completely.
1. Keep the Mulching plug.
2. Lift the side discharge cover with one hand
and hook in the side discharge chute with the
other hand. (See Fig. 12)
3. Release the side discharge cover to secure
the chute in position. (See Fig. 13)
Set required function
WARNING!
Before changing any
accessory, switch o the tool and make sure that
the blade has stopped completely
NOTE:
This lawn mower has three functions.
These functions can be converted by changing
accessory setting as described above. Please
see the following chart for detail.
Mulching
plug
Grass
bag
Side
discharge
chute
Collection * × √ ×
Mulching * √ × ×
Side Discharge
*
√ × √
“√”: installed “×”: uninstalled
* The following information:
Collection: the grass has been cut and collected
by grass bag.
Mulching: mulch the grass, by cutting into small
pieces which then degrade and fertilise the lawn
Side discharge: the grass has been cut and
distributed to the side of the machine.
Loading ...
Loading ...
Loading ...