Loading ...
Loading ...
Loading ...
3
www.jbl.com
English
REMOTE CONTROL FUNCTIONS
3
2
5
7
11
6
8
9
12
BASS
1
4
10
The following command buttons are included with the remote control:
1. Power on/Standby
2. Bluetooth
3. HDMI ARC
4. Aux-in
5. Optical
6. Audio Feedback
7. Mute
8. Volume +/-
9. Subwoofer Volume +/-
10. Harman Display Surround
11. Stereo
12. Harman Volume
Power on/Standby:
To bring the JBL CINEMA BASE to operational mode from Standby mode,
press the Power button (the power indicator on the JBL CINEMA BASE will
turn white). To put the system in the Standby mode, press the power button
while the system is switched ON (the power indicator on the JBL CINEMA
BASE will turn amber). If you do not press the Power button, the JBL CINEMA
BASE will automatically go into Standby mode approximately in 10 minutes
after the audio input signal stops.
Bluetooth
®
: This button is used to set the soundbase into Bluetooth
mode. It is also the same button that will be used to pair your system with
Bluetooth-enabled devices. Use a Short Press to switch to Bluetooth source.
Press and hold to make the unit go into pairing mode.
NOTE: JBL CINEMA BASE’s Bluetooth device name is
CINEMA BASE.
HDMI: Press this button to select an HDMI TV source.
Aux-In (Analog): Press this button to select an Analog source.
Optical (Digital): Press this button to select a Digital source.
Audio Feedback: The Audio Feedback button on the remote
control enables/disables audio feedback. When enabled, this feature will add
an audible tone to help you recognize when other features are engaged:
1. Bluetooth
2. Harman Volume on/off
3. Subwoofer volume control
4. Audio feedback on/off
When Audio Feedback is disabled, you will not hear any audible tone when
using these functions.
Mute: Press the mute button to mute the sound, press the mute button
again or any Volume button to release the mute control.
Volume +/-: Press the “+” button to increase volume; press the “–”
button to decrease volume.
Subwoofer Volume +/-: The Bass +/- buttons on the remote
control increase and decrease the subwoofer levels.
Harman Display Surround:
This button turns the JBL CINEMA BASE’s Harman Display Surround
processing ON/OFF. The Surround button indicator on the JBL CINEMA BASE
turns blue when Surround is active, and turns white when Stereo mode
is active. The HARMAN Display Surround setting will produce a complete
surround-sound experience for anyone sitting in front of and several feet
away from the soundbase. Although it is particularly effective when watching
movies, you can also try the HARMAN Display Surround setting for music.
Stereo: Use this button to switch your system into stereo mode.
Harman Volume: The Harman Volume button on the remote
control activates Harman Volume. Harman Volume helps you keep your sound
levels consistent and reduce extreme volume transitions. These types of
transitions are typically experienced with television commercial interruption
or movie transitions between quiet dialogue and loud
sound effects.
PLACING YOUR TELEVISION ON
THE JBL CINEMA BASE
Your JBL CINEMA BASE is designed to sit under your existing tabletop TV,
directly underneath it and centered with the TV screen. As long as the table’s
surface is flat, the JBL CINEMA BASE will rest securely on its rubber feet.
Loading ...
Loading ...
Loading ...