Loading ...
Loading ...
Loading ...
6
Inserting two R6 (size AA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
Make sure that all discs are removed from the
unit.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down LOOP and press ?/1 to turn
off the system.
3 If your system has a VOLTAGE
SELECTOR on the rear panel, set it
to the position of your local power
line voltage.
4 Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press ?/1, the system
turns on and the demonstration
automatically stops.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
To attach the center speaker feet
Attach the four center speaker feet (supplied)
to the bottom corners of the center speaker.
To connect optional AV
components
See page 44.
To deactivate the demonstration
When you set the time (See “Step 3: Setting
the time”), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY (for LBT-LX90AV/
LX9AV) when the system is off.
VOLTAGE SELECTOR
220V
120V
230
240V
-
Step 1: Hooking up the system
(continued)
Notice for customers in the United
Kingdom
The AC power cord has been fixed temporarily
on the rear panel with the plug band for
shipment.
Unlock the plug band to remove the plug.
Plug band
Back panel
“LOCK” appears in the display. It is now
safe for transportation.
Loading ...
Loading ...
Loading ...