Loading ...
Loading ...
Loading ...
18
Instruments & Controls
Gauges & Indicators
Lamp Check
Lamp Check.
ABS Indicator
Lamp Check.
low oil pressure indicator (red)
Lights when engine oil pressure is low enough to cause engine damage. If the
low oil pressure indicator lights during operation, pull safely to the side of the
road. See page for instructions and cautions. .
Lights when there is any abnormality in the PGM-FI (Programmed Fuel
Injection) system. Should also light for a few seconds and then go off when the
ignition switch is turned ON and the engine stop switch is at RUN. If the
indicator comes on at any other time, reduce speed and take your motorcycle to
your dealer as soon as possible.
Lights when there is any abnormality in the anti-lock brake system (ABS).
Normally, this indicator comes on when the ignition switch is turned ON, and
goes off after you ride the motorcycle at a speed above 6 mph (10 km/h). If the
indicator comes on while riding, stop the motorcycle in a safe place and turn off
the engine. Refer to , page . For information about ABS, see
page .
high beam indicator (blue)
Lights when the headlight is on high beam.
PGM-FI malfunction indicator lamp (MIL) (red)
anti-lock brake system (ABS) indicator (red)
61
60
166
１１／０９／２０ １５：４５：２９ ３１ＭＣＳ６８０ ００２５
Loading ...
Loading ...
Loading ...