Loading ...
Loading ...
Loading ...
42 psi (290 kPa , 2.90 kgf/cm )
42 psi (290 kPa , 2.90 kgf/cm
)
front
rear
wear indicator
wear indicator location
mark
126
Inspection
Tires
Servicing Your Honda
Safety Precautions
Tubeless tires have some degree of self-sealing ability if they are punctured.
However, because leakage is often very slow, you should look closely for
punctures whenever a tire is not fully inflated.
Always check air pressure when your tires are ‘‘cold’’, after the motorcycle has
been parked for at least three hours. If you check air pressure when your tires
are ‘‘warm’’ –– even if your motorcycle has only been ridden for a few miles ––
the readings will be higher. If you let air out of warm tires to match the
recommended cold pressures, the tires will be underinflated.
Refer to on page .
The recommended ‘‘cold’’ tire pressures are:
Whenever you check the tire pressures, you should also look for:
Bumps or bulges in the side of the tire or the tread. Replace any tire that has a
bump or bulge.
Cuts, slits, or cracks in the tires.
Replace the tire if you can see fabric or cord.
Nails or other foreign objects embedded in the side of the tire or tread.
Excessive tread wear.
72
１１／０９／２０ １６：００：３３ ３１ＭＣＳ６８０ ０１３３
Loading ...
Loading ...
Loading ...