Loading ...
Loading ...
Loading ...
Installation
32
Uneven installation surfaces
If the installation surface is uneven
making flush installation difficult, the
frame can be realigned.
Fit the ventilation system as
described on the installation plan.
Disconnect the ventilation system
from the electrical supply before
replacing the bulbs (see
"IMPORTANT SAFETY
INSTRUCTIONS").
Insert the lever supplied into the gap
between the bulb and the bulb
holder.
The bulb will then drop downwards.
Grip the bulb, turn it
counterclockwise, and take it out.
Remove all other bulbs in the same
way.
Fit one of the screws supplied into
each bulb holder.
Tighten the screws with a screwdriver
until the frame sits flush with the
installation surface.
Do not overtighten the screws!
Refit the bulbs.
Loading ...
Loading ...
Loading ...