Loading ...
Loading ...
Loading ...
9
Setting the Temperature Control
The unit has two separate temperature zones. The temperature of the left zone can be set
between 36ºF and 43ºF (2ºC and 6ºC) which is suitable for storing beverages and the
temperature of the right zone can be set between 41ºF and 68ºF (5ºC and 20ºC) which is
suitable for storing wines.
When the unit is plugged in for the first time, the unit will power up automatically to the preset
defaults.The preset temperature at the factory for the LEFT temperature zone is 38ºF (3ºC) and
for the RIGHT temperature zone is 54ºF (12ºC).
You can press the left side UP and DOWN keys to control the internal temperature of the LEFT
temperature zone and press the right side UP and DOWN keys to control the internal
temperature of the RIGHT temperature zone. When you press the two keys at the same time,
the display will show the last temperature set previously.
The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once;
conversely, the temperature will decrease 1ºC or 1ºF if you press the DOWN key once. The
display flashes while you make the setting.
After the temperature has been set, the display shows the current inner temperature of the
particular temperature zone.
To view the set temperature at any time, press the UP or DOWN key; the set temperature will
temporarily flash in the display for 5 seconds. Then the display shows the current inner
temperature again.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection. The
LIGHT switch allows you to toggle between 2 modes of operation for the internal lights: functional
(default) mode and showcase mode. If you are in functional (default) mode (also named Energy Saving
Mode), the lights will turn on only when the door is open. If you are in showcase mode, the lights will be
on whether or not the door is open.
The unit is fitted with an LED light system. To change the LED light fitting, please contact the service
department.
NOTE: Please use only the same type of LED light fittings originally provided by the manufacturer.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the
displays, interior light and audible alarms and prevents them from turning on again. Normal cooling
operations will still take place.
To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at least 5 seconds.
The indicator light (the dot at the bottom right of the display) will flash four times and confirm that Sabbath
mode is ON.
Sabbath mode can be canceled by repeating the above process. Sabbath Mode will automatically turn off
after 96 hours.
NOTE:
If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
Loading ...
Loading ...
Loading ...