Loading ...
Loading ...
Loading ...
Changing the door hinging
79
Lift the lower door off and place it
carefully to one side.
Changing over the lower hinge
plate
Pull the hinge pin complete with
washer and adjusting foot upwards to
remove.
Unscrew the hinge plate.
Remove the stopper from the
hinge plate.
Slightly loosen the screw of the
door closing aid on the hinge plate
.
Turn the door closing aid 90°
clockwise into the opposite hole in
the hinge plate.
Then tighten the screw.
Insert the stopper into the other
hole.
Remove the cover and refit on the
opposite side.
Screw the hinge plate onto the
opposite side with the screws ,
using only the outer two slots. Do not
use the middle screw . Otherwise
you will not be able to align the door
later on.
Reinsert the hinge pin complete
with washer and adjustable foot.
Important: The lug on the hinge pin
must point to the back again.
Loading ...
Loading ...
Loading ...