Loading ...
Loading ...
Loading ...
32 EN
3
Select [Barring number], then press [OK]
to confirm.
4
Select a number from the list, then press
[OK] to confirm.
5
Edit the number, then press [OK] to
confirm.
The setting is saved.
Change the barring PIN/passcode
1
Select [Menu] > [Services] > [Call barring],
then press [OK] to confirm.
2
Enter the call barring PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
3
Select [Change PIN], then press [OK] to
confirm.
4
Enter the old barring PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
5
Enter the new PIN/passcode, then press
[OK] to confirm.
6
Enter the new PIN/passcode again, then
press [Save] to confirm.
The setting is saved.
Call blocking
There are two ways to block incoming calls:
• block anonymous calls;
• create a blacklist.
Note
• Make sure you have subscribed to the caller ID
service before you use this feature.
Block anonymous calls
You can block calls without identity in order
to reduce unwanted calls, like calls from
telemarketers.
1
Select [Menu] > [Services] > [Call block],
then press [OK] to confirm.
2
Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
3
Select [Anonymous call] > [On]/[Off] to
activate/deactivate call blocking, then press
[OK] to confirm.
The setting is saved.
Blacklist
You can put numbers into the blacklist to block
incoming calls from certain undesirable numbers.
You can create 4 sets of numbers with 24 digits at
maximum for each set of numbers. When there
is an incoming call that starts with one of these 4
sets of numbers, the ringer will be muted.
Note
• The contact name in Phonebook will not be
displayed if this contact number matches the
record saved in the blacklist.
Create a blacklist
1
Select [Menu] > [Services] > [Call block],
then press [OK] to confirm.
2
Enter the call blocking PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
3
Select [Blacklist] > [Block number] if
you have activated call blocking, enter the
number, then press[OK] to confirm.
The setting is saved.
Loading ...
Loading ...
Loading ...