Loading ...
Loading ...
Loading ...
29EN
English
A confirmation request is displayed on
the handset.
2
Press [OK] to confirm.
All old messages are permanently
deleted.
Note
• You can only delete the read messages. No
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press to answer the call.
From the base
Press to adjust the speaker volume
during call screening.
Note
• If you turn the speaker to the lowest volume
level, the call screening function is off.
Set the ring delay
You can set the number of times the phone rings
before the answering machine picks up the call.
1
Select [Menu] > [Answ. Machine] > [Ring
delay], then press [OK] to confirm.
2
Select a new setting, then press[OK] to
confirm.
The setting is saved.
Note
• Make sure that the answering machine is
switched on before this feature can be applied.
Tip
• When you access the answering machine
remotely, you are recommended to set the
ring delay to [Toll saver] mode. This is a cost
effective way to manage your messages. When
there are new messages, the answering machine
picks up the call after 3 rings; When there is no
messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
• The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Select [Menu] > [Answ. Machine] >
[Remote access], then press [OK] to
confirm.
2
Select [Activate]/[Deactivate], then press
[OK] to confirm.
The setting is saved.
Loading ...
Loading ...
Loading ...