Loading ...
Loading ...
Loading ...
8
Using the radio
Using in PC monitor mode
Choosing radio mode
Press the
Z key on the remote control to
switch the TV to radio mode. Press the
X
key to return to TV mode. In radio mode the
number and name of the station (if available),
its frequency and the sound mode are
indicated on the screen.
To enter the name of the stations use the NAME
menu. (p. 7)
Selecting programmes
Use the
09or @ P # keys to select the
FM stations (from 1 to 40).
List of radio stations
Press the
ı
key to display / hide the list of
radio stations. Then use the cursor to select a
station.
Using the radio menus
Use the
H key to access the specific radio
settings.
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the INSTALL menu :AUTO
STORE (for a complete search) or MANUAL
STORE (for a station by station search). The
SORT and NAME menus let you classify or
name the radio stations. These menus work in
exactly the same way as the TV menus.
Screen saver
In the FEATURES menu you can activate / close
the screen saver. The time, the frequency of
the station and its name (if available) move
across the screen.
PC Mode
Your TV can be used as a computer monitor.
The PIP function lets you display a
superimposed image to watch the TV channels
at the same time.
You must first of all connect the computer and
adjust the resolution (see p.15).
Choosing PC mode
Press the
V key on the remote control to
switch the TV to PC mode. Press the
X key
to return to TV mode.
If there is no PC signal for more than five seconds,
the TV automatically goes into standby mode.
Using PIP
While in PC mode you can call up a window
for TV channels.
& Press the
œ key to display the PIP screen.
The television image is reproduced in a small
superimposed window.
é Press the
œ key again to reduce the size of
the window then make it disappear.
“ Use the π key if you want to hide the
window. You can also shift it progressively by
using the cursor.
‘ Use the
09or @ P # keys to change the
programmes of the PIP screen or the
n key
if you want to display a picture from an
appliance connected to the TV (e.g. video
recorder, DVD).
Using the PC menus
Press the H key to access the specific settings of
the PC monitor mode. Use the cursor to adjust
them (the settings are automatically saved) :
• AUDIO SELECTION :
to choose the sound
reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while
you use the computer.
Note: you must choose TV or radio mode before
going into PC mode. You cannot listen to the radio
when the PIP screen is displayed.
•
BRIGHTNESS / CONTRAST
: to adjust the
brightness and contrast.
• ADJUST COLOUR :
to adjust the colours (cold,
normal or warm).
• VIDEO NOISE :
eliminates the horizontal (PHASE)
and vertical (CLOCK) interfering lines.
• ADJUST POSITION :
to adjust the horizontal and
vertical placing of the image.
• AUTO ADJUST :
position is set automatically.
• PIP CONTROLS :
to adjust the size and position
of the PIP screen.
• MODE SELECT :
to come back to TV or radio
mode.
• RESET TO FACTORY SETTING :
to return to the
factory settings (default settings).
• VIEW FORMAT:
to choose between large screen
or the original format of the PC screens.
Loading ...
Loading ...
Loading ...