Loading ...
Loading ...
Loading ...
12
Installing the line trimmer attachment shaft.
(See Fig. 3 )
1. Pull out the locking pin on the coupling
connector and rotate it to stay on the collar
top.
2. Loosen the coupling connector knob by
rotating counterclockwise on the power head
assembly.
3. Align the male square shaft inside the line
trimmer attachment to the female square
hole inside the coupling connector and insert
the line trimmer attachment to the coupling
connector completely.
4. Pull out the locking pin and rotate it to leave
the collar top.
5. Rotate the line trimmer attachment until
an audible ‘click’ to tell the locking pin is in
locking position.
Note!
You may have to rotate the shaft to nd
the right position for the pin to lock!
6. Re-tighten the connector knob and make
sure the attachment is fully secured in place.
Removal of the line trimmer attachment shaft
(See Fig. 4)
1. Stop the line trimmer and remove the battery
pack from the machine.
2. Loosen the coupling connector knob by
rotating counterclockwise.
3. Pull out the locking pin on the coupling
connector and rotate it to stay on the collar
top.
4. Pull out the line trimmer attachment on any
purpose.
Installing auxiliary handle (See Fig. 5)
1. Uninstall the bolts on the Auxiliary handle.
2. Install the auxiliary handle on the Shaft and
then tighten the bolts with nut and make sure
the auxiliary handle is rmly secured in place.
Attaching the Shoulder Harness (See Fig. 6)
- Depress the harness clip and t to the
harness hook.
OPERATION
Inserting and removing the battery pack
To insert the battery pack
1 Align the groove on the battery pack with the
corresponding mounting ribs and press the
battery pack down until you hear a “click”.
2. Check to make sure the battery pack is rmly
secured into position- and make sure the
handle is closed on top of battery.
Battery Pack Y0L120BAT2.5 (See Fig. 16)
1. Lift handle
2. Main housing
3. Indicator button
4. Green LED lamps
5. Red LED lamp
Battery Pack Operation (See Fig. 17)
1. When you push the power indicator button, the
green LED lights will show the power remaining.
(See Fig. 17
①
)
2. When the battery pack over discharges or remains
very low power, the red LED light will ash. (See
Fig. 17
②
)
3. When the battery pack temperature is exceeded,
the red LED light will ash. Cool it down for 10~20
minutes. (See Fig. 17
②
)
4. When there is fault with the battery pack, the red
LED light will ash. (See Fig. 17
②
)
5. Once the battery pack is correctly located in the
charger, the 4 green LED lights of the battery
pack will ash LED lights to indicate the charging
process. At the same time the green LED light of
the charger will ash continuously during normal
charging, while the red LED light is still on. (See
Fig. 17
③
)
To remove the battery pack from the tool (See
Fig. 7)
1. Depress the battery releasing/locking button
on the housing.
2. The battery pack will pop up automatically.
Then lift/rotate the battery handle and remove
the battery .
Switching On/O
WARNING!
Before operating the unit, remove stones, loose
pieces of wood and other objects from the cutting
area.
To switch ON(See Fig. 8)
1. Press the Start button A until green LED light
lights up.
2. Depress the safety lock button-B and
squeeze the switch trigger-C at the same
time.
Loading ...
Loading ...
Loading ...