Loading ...
Loading ...
Loading ...
15
the mini-chopper.
- Connect the appliance and start
using the speed control (a2),
(Fig. 2), initially at speed 1 then 2,
3, 4, 5. Use the Turbo button (a2) if
the recipe requires more power.
- Once the preparation is finished,
stop the appliance and
disconnect it.
- Remove the appliance and then
the reducer (n3).
- Remove the blade (n2) holding it
by the plastic part.
- After use, remove the food.
- Do not operate this accessory
empty.
800ML BLENDER BOWL
FUNCTION
(DEPENDING ON MODEL)
- Place the bowl (o1) on the stabiliser
base (q).
- Place the blade (o2) on the shaft of
the bowl (o1).
- Place the food in the bowl (o1) and
then place the leak-tight lid (o3)
and the reducer (o4).
• Check that the appliance is
unplugged, that the speed control
(a2) is set to "0" and that the
beaters or kneaders are no longer
on the appliance.
- Lift the panel at the back of the
appliance and place the
appliance on the reducer (o4) of
the blender bowl.
- Connect the appliance and start
using the speed control (a2),
(Fig. 2), initially at speed 1 then 2,
3, 4, 5.
Use the Turbo button (a2) if the
recipe requires more power.
- Once the preparation is finished,
stop the appliance and
disconnect it.
- Remove the appliance, the
reducer (o4) and then the lid
(o3).
- Remove the blade (o2) holding it
by the plastic part.
- After use, remove the food.
- Do not operate this accessory
empty.
Loading ...
Loading ...
Loading ...