Loading ...
Loading ...
Loading ...
(112,1)
北米Model "A1320BE-C" EDITED: 2017/ 10/ 10
& Unlock using PIN Code Ac-
cess
When all doors including the rear gate are
locked, you can unlock the doors (includ-
ing rear gate) without a key by pressing the
rear lock button.
1) Rear lock button
NOTE
PIN Code Access will be helpful if the
key fob is accidentally left in the
vehicle. It is recommended that a 5-
digit security code (PIN code) be regis-
tered.
! Preparation for registering a PIN
code
1. Turn off the ignition switch.
2. Close all doors (including rear gate).
3. Press and hold the “
” button on the
access key fob. Then all doors (including
rear gate) will be locked.
4. Keep the “
” button pressed, and
press the rear lock button within 5 seconds
after step 3.
5. Press and hold the rear lock button for
more than 5 seconds. Confirm a chirp
sound.
6. Release the “
” button and rear lock
button.
7. Press the “
” button on the access key
fob while the chirp sounds.
Then the chirp will stop and the prepara-
tion is complete.
NOTE
Press the “ ” button within 30 seconds
of step 6 to end the preparation mode
and move on to the registration stage.
Unless the “
” button is pressed within
30 seconds after step 6, the PIN code
registration will be canceled.
! Registration for a PIN code
For example, to register “32468” as the
PIN code, perform the following proce-
dure.
1. Press the rear lock button three times.
2. After a chirp sounds once, press the
rear lock button twice.
3. After a chirp sounds once, press the
rear lock button four times.
4. After a chirp (ding) sounds once, press
the rear lock button six times.
5. After a chirp (ding) sounds once, press
the rear lock button eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the chirp
starts sounding intermittently.
7. All doors will be unlocked and locked.
Then the PIN code will be registered.
Keys and doors/Keyless access with push-button start system
2-10
Loading ...
Loading ...
Loading ...