Loading ...
Loading ...
Loading ...
11
Care & Cleaning
• Do not rinse the unit or immerse the unit
in water.
• Do not use detergent to clean any water-
containing parts of the humidifier.
• Do not use abrasive cleaners or brushes
to clean.
• Clean the surface of the device with
a soft cloth.
SCALE
To reduce the possibility of scale (white mineral
deposits) build-up on the surface of the water
basins, inner surface of the water tank and
transducer, the following is recommended:
• Change the water daily.
• If possible, use distilled or demineralised
water.
• Drain, clean and thoroughly dry all parts
of the unit before putting it into storage.
CLEANING THE TRANSDUCER
If mineral deposits are evident on the
transducer, clean the surface with a soft, clean
cloth and a small amount of undiluted white
vinegar. To remove mineral deposits, put 5–10
drops of undiluted white vinegar on the surface
of the transducer. Leave to soak for 2–5 minutes.
Use a cotton swab to gently loosen up the scale
of the surface. Rinse the transducer with clean
water and wipe clean.
IMPORTANT
Be careful not to damage the Transducer
during cleaning. Do not use any metal to scrape
it or touch with bare fingers.
CAUTION: Before carrying out cleaning or maintenance of the product, always turn off and unplug
the cord from the power socket.
CHANGING THE CONDITIONING
CARTRIDGE
It is advisable to change the conditioning
cartridge every 1000L, or every 12 months.
To change:
1. Take off the mist nozzle and remove the
water tank from the base and turn water
tank upside down.
2. Unscrew the water tank cover.
3. Unscrew the water tank cover from
the conditioning cartridge and dispose
of the old cartridge.
4. Screw the new cartridge onto the water
tank cover.
5. Replace the water tank cover with the
cartridge attached and position the water
tank back onto the base. Re-instate the
mist nozzle.
Replacement cartridge code:
CLI-AH300-RF
Loading ...
Loading ...
Loading ...