Loading ...
Loading ...
Loading ...
en
16
Note
The signal strength should be at least
2. If the signal strength is too low, the
connection could be interrupted. Place
the router and the refrigerator closer
together, ensure that the connection is
not disturbed by shielding walls or
install a repeater to strengthen the
signal.
Resetting Home Connect settings
If the connection process does not work
or you would like to log the refrigerator
on to a different home network (WLAN),
you can reset the Home
Connect settings:
1. Press the menu button to open the
Home Connect menu.
The display shows Cn.
2. Press the refrigerator compartment
button E repeatedly until the displays
rE and oF are shown.
3. Press the freezer compartment
button E to reset the settings.
■ The display shows a short
animation and then again oF.
The Home Connect settings have
been reset.
■ If the display shows Er, start the
reset again or call customer
service.
Information on data protection
When your Home Connect refrigerator is
connected for the first time to a WLAN
network that is connected to the Internet,
your refrigerator transmits the following
categories of data to the Home Connect
server (initial registration):
■ Unique appliance identification
(consisting of appliance codes as well
as the MAC address of the installed
Wi-Fi communication module).
■ Security certificate of the Wi-Fi
communication module (to ensure a
secure IT connection).
■ The current software and hardware
version of your refrigerator.
■ Status of any possible previous
resetting to factory settings.
This initial registration prepares the
Home Connect functions for use and is
required only when you want to use
Home Connect for the first time.
Note
Please note that the Home Connect
functions can only be utilized with the
Home Connect app. You can call up
information on data protection in the
Home Connect app.
Loading ...
Loading ...
Loading ...