Loading ...
Loading ...
Loading ...
5
6
RJ11-15-SSTC RJ11-15-SSTC
BEFORE FIRST USE
1. Remove all packing materials from the inside and outside of kettle.
2. Wash the lid, lid holder, kettle and tea infuser with warm water and a soapy sponge.
Warning: Do NOT submerge the underside of the kettle, its base or plug in water or other
liquids.
3. Dry all parts thoroughly.
HOW TO USE
1. Ensure the kettle’s cord is positioned in the cord holder.
2. Place kettle’s base on a flat, sturdy surface away from all sources of water and heat.
3. Plug cord into outlet.
4. Remove kettle from base if attached.
5. Ensure the white lid markings are lined up with the lock marking and lid holder arrow. Use
the lid handle to pull lid up to remove.
6. Fill kettle with desired amount of water. Do NOT exceed MAX (1.5L) and do not fill less than
MIN (1.5L).
7. Replace lid, ensuring the lid holder handle is pointed toward the handle arrow.
8. Place kettle on base.
9. Turn the control knob to wake the kettle. Continue turning the control knob to desired
preset; press in to select.
10. Once a preset is selected, the recommended steep time will appear on the screen (unless
Custom has been selected.) If desired, turn the control knob to adjust steep timer. Press
the knob to set the steep timer OR press the Start/Stop button to start the kettle. While
the kettle is heating, the ring around the Start/Stop button will illuminate in red and the live
temperature of the water will appear on the screen.
11. Once the set temperature is reached, the kettle will beep loudly once, then chirp (until steep
timer is activated,) the ring around the control knob will flash in white and the temperature
of the water will toggle on the control panel with the set steep time.
12. If a steep time was set, follow the “How to Steep Tea” instructions on page 6 to attach the
tea infuser and start the steeping process.
13. When the steep timer expires, the kettle will beep three times and automatically switch
to keep warm mode. While the kettle is in the keep warm mode, the live temperature of the
water will display on the screen and toggle between the remaining keep warm time. Note:
The water will keep warm at the already set temperature.
14. The kettle may be turned off by pressing the Start/Stop button at any time. The kettle will
also automatically turn off after the keep warm time expires.
HOW TO STEEP TEA
1. Fill tea infuser with desired amount of loose tea. (Use the chart below.)
2. When the set water temperature is reached, turn the lid handle counterclockwise to
unlock; use caution to pull up. Warning: The water inside the kettle will be hot and will
create steam that could potentially cause burns. Use caution when opening the removing,
attaching and detaching the lid.
3. Align rivets on tea infuser with divots on lid. Turn tea infuser clockwise to secure.
4. Ensure lid holder is in place. Insert tea infuser with lid into kettle. Turn lid handle clockwise
to secure.
5. Press control knob to activate steep timer.
6. When steep timer expires, turn lid handle counterclockwise and pull up to remove tea infuser.
7. Allow tea infuser to cool.
8. When tea infuser cools, remove from lid and discard steeped tea.
9. Reattach lid on lid holder.
HOW TO STEEP TEA
Water Amount Loose Tea Amount
2 cups 2 tablespoons
3 cups 3 tablespoons
4 cups 4 tablespoons
5 cups 5 tablespoons
6 cups 6 tablespoons
HOW TO SET THE DELAY TIMER
The kettle may be programmed up to 24 hours in advance. For example, if it is 8 pm, the kettle
can be set to start heating at 7 am using the instructions below. Adjust the time in step 2
according to desired start time.
1. Press the Delay button.
2. Use the control knob to set the timer for 11 hours.
3. Press the Start/Stop button to start the delay timer. The ring around the Start/Stop button
will illuminate in red and the timer icon will flash on the screen, with the remaining time, until the
kettle starts heating, 11 hours later.
4. The kettle will then begin heating 11 hours later at 7 am.
HOW TO TURN OFF THE KETTLE
1. Kettle will automatically turn off when keep warm time expires.
2. While kettle is keeping warm, press Start/Stop button. Display will remain illuminated for 60
minutes.
3. Unplug kettle.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...