Loading ...
Loading ...
Loading ...
DJI Goggles Racing Edition
User Manual
© 2019 DJI All Rights Reserved.
5
3
1
2
4
5
6
7
8
DJI OcuSync Air Unit
1. Camera Port*
Connects to the DJI OcuSync Camera.
2. S.Bus Port
Connects with the 3-in-1 Cable (Power,
S.Bus, UART), and connects to the power,
ight controller, and OSD port based on the
information below.
RED: Power
BLACK: Power GND
WHITE: UART RX (Connects to OSD TX)
GRAY: UART TX (Connects to OSD RX)
BROWN: Signal GND
YELLOW: S.Bus (Connects to Flight
Controller RX)
3. Micro SD Card Slot
Insert the Micro SD card to store the
recorded video.
* Note that both this port and the camera connector plug
are customized Type-C interfaces, and they are not
compatible with third-party equipment.
4. Antenna Ports (MMCX)
Used to attach the Air Unit antennas.
5. Micro USB Port
Connects to your PC for firmware updates
through DJI Assistant 2.
(When the Air Unit is powered on)
6. PPM Port
Connects to external devices that can handle
PPM signals via the PPM Cable. Set the
corresponding channel in DJI Goggles RE
to control the device remotely with head
movements. (coming soon)
RED: Power
BLACK: Signal GND
WHITE: PPM signal
7. Link Button
Press this button to link the OcuSync Air Unit
with the Goggles RE.
8. Linking Status Indicator
Indicates the linking status of the DJI
OcuSync Air Unit and the Goggles RE.
Loading ...
Loading ...
Loading ...