Loading ...
Loading ...
Loading ...
6
BEFORE YOU BEGIN
Read all instructions completely for detailed operating procedures.
The battery in your EvolutionX
™
Cordless Rechargeable Mini Chopper
has not been fully charged. Before the first use of this appliance,
the battery must be charged until 3 blue LED lights are illuminated.
See Charging Your Mini Chopper/Battery Life below.
CHARGING YOUR MINI CHOPPER/
BATTERY LIFE
The batteries in your EvolutionX™ Cordless Rechargeable Mini Chopper
have not been fully charged. Before the first use of this appliance,
the batteries must be charged until all 3 blue battery indicator lights
illuminate. With a full charge, your mini chopper will run for approximately
20 minutes, depending on load. Your mini chopper will be fully charged
in approximately 2 hours.
HOW TO READ
THE BATTERY LIFE INDICATOR
• When 1st light is flashing and others are off, battery capacity < 40%.
• When 1st light is solid and 2nd light is flashing, battery capacity
is 40% – 70%.
• When 1st and 2nd lights are solid and 3rd light is flashing, battery
capacity is 70% – 95%.
• When Battery Life Indicator/LED Light Bar displays 3 solid blue power
lights, battery capacity is 95%. (NOTE: A 95% charge for a lithium ion
battery is considered a full charge.)
QUICK-CHARGE FEATURE
Your Cordless Rechargeable Mini Chopper is equipped with a quick-
charge feature. If your mini chopper runs out of power, you can “quick
charge” your unit:
• Charge for 15 minutes to get 25 seconds of runtime.
• Charge for 30 minutes to get 1 minute and 45 seconds of runtime.
• Charge for 60 minutes to get 5 minutes and 45 seconds of runtime.
• Charge for 2 hours for 20 minutes of runtime (full charge).
NOTE: Do not leave your mini chopper uncharged for an extended period
of time, as it will affect the life of the rechargeable battery.
ASSEMBLY
After washing all parts, please see below for assembly.
Place base on flat surface and plug in.
1. With the base unit on the tabletop, place the work bowl over the center
stem and turn slightly to the right, until bowl drops down to the bottom
of the stem.
2. Turn the work bowl counterclockwise to lock onto base.
3. CAREFULLY pick up the blade by its hub and place on the center
stem until it drops to the bottom of the stem. NEVER TOUCH THE
BLADE ITSELF.
4. Add food ingredients.
5. Place the cover on the work bowl with the long tab to the right
of the rear column.
6. Turn cover counterclockwise to securely lock into locking post.
7. You are ready to CHOP/GRIND.
Loading ...
Loading ...
Loading ...