Loading ...
Loading ...
installation instructions
4 INSTALLATION Induction Cooktops Induction Cooktops ASSEMBLY 5
assembly
1
2
1
2
TIPS & INFORMATION
tips & information
Before the installation, note down the serial number from
the rating plate. The rating plate of the appliance is on its
lower casing.
PNC: 949163299
Made in China By
Electrolux Home
Products Pty Ltd
Model:
S NO.: 50Hz 7.4 KW
220 - 240 V AC
CHI743BA
(240)949163299(21)xxxxxxxx(20)00
PNC: 949163298
Made in China By
Electrolux Home
Products Pty Ltd
Model:
S NO.: 50Hz 7.4 KW
220 - 240 V AC
CHI643BA
(240)949163C298(21)xxxxxxxx(20)00
~
Made in China
50Hz
SHI643BA
220 - 240V
MODEL:
PNC:949163315
7.4kW
S NO.:
(240)949163315(21)55108547
The Safety Instructions
WARNING
warning
You must read these!
• Make sure that the appliance has not been damaged in
transportation. Do not connect a damaged appliance.
If it is necessary, speak to the supplier.
• Only an authorized servicing technician can install, connect
or repair this appliance. Use only original spare parts.
• Only use the built-in appliances after you assemble the
appliance into correct built-in units and work surfaces
that align to the standards.
• Do not change the specification of this appliance.
Due to a risk of injury and damage.
• Fully obey the laws, ordinances, directives and
standards in the country where you use the appliance
(safety regulations, recycling regulations, electrical safety
rules etc).
• Keep the minimum distances to other appliances and units.
• Make sure that the ventilation space of 5mm, under the
benchtop and directly in front of the appliance is free.
The warranty does not cover damages caused by lack
of adequate ventilation.
• Install shock protection, for example install the drawers
only with a protective floor directly below the appliance.
• Do not use an external timer or a separate remote-
control system to operate the appliance.
• Set the cooking zone to “off” after each use. Do not rely
on the pan detector.
• Keep the cut surfaces of the worktop safe from moisture
with a correct sealant.
• Seal the appliance to the worktop with no space
between with a correct sealant.
• Keep the bottom of the appliance safe from steam and
moisture, e.g. from a dishwasher or oven.
• Do not install the appliance adjacent to doors and below
windows, due to risk of cookware being pushed off hot
appliance.
WARNING
warning
Risk of injury from electrical current. Carefully obey the
instructions for electrical connections.
• Make electrical mains terminal free of voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket connections can
make the terminal become too hot.
• A qualified electrician must install the connections in the
clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single phase or two phase
connection.
• Replace the damaged mains cable with a special cable
(type H05BB-F Tmax 90°C; or higher). Speak to our
Customer Care team.
The appliance must have the electrical installation which lets
you disconnect the appliance from the mains at all poles
with a contact opening width of minimum 3mm. You must
have correct devices to isolate: line protecting cut-outs,
fuses (screw type fuses removed from the holder), earth
leakage trips and contactors.
min. 50mm
Make sure that a ventilation space of 5mm directly below the benchtop
is included in the installation and kept free during use of the appliance.
The warranty does not cover functional failures caused by the lack of an
adequate ventilation space.
min. 50mm
min. 5mm
min. 500mm
1
2
1
2
Loading ...
Loading ...
Loading ...