GIGA X7 Professional Instructions for Use
JURA Type 677
K
For your safety: read and understand manual before use.
E
2
Table of contents
Your GIGA X7 Professional
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
JURA on the Internet ....................................................................................................................................10
Settings by the JURA service technician ...................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the water tank ...................................................................................................................................10
Filling the bean container ............................................................................................................................11
First-time use .................................................................................................................................................11
Determining the water hardness ..............................................................................................................15
Connecting milk ...........................................................................................................................................16
2 Preparation 17
Coffee, latte macchiato etc.– options for preparation .........................................................................17
Preparation at the touch of a button ........................................................................................................18
Preparation using the product selector ...................................................................................................19
Ground coffee ..............................................................................................................................................20
Barista recipes at a glance ..........................................................................................................................21
Preparing barista recipes ............................................................................................................................21
Permanently setting amounts for the cup size .....................................................................................22
Activating the grinder selection ...............................................................................................................23
Hot water ......................................................................................................................................................24
3 Daily operation 25
Switching on ................................................................................................................................................25
Daily maintenance ......................................................................................................................................25
Switching off ................................................................................................................................................26
4 Permanent settings in programming mode 27
Possible settings in programming mode ............................................................................................... 27
Product settings ..........................................................................................................................................28
Setting the consistency of grind ..............................................................................................................30
Maintenance settings ..................................................................................................................................31
Setting the water hardness ....................................................................................................................... 32
Energy-saving mode .................................................................................................................................. 33
Time and date ..............................................................................................................................................33
Timer .............................................................................................................................................................34
Automatic switch-off ..................................................................................................................................35
Units ..............................................................................................................................................................36
Restore factory settings .............................................................................................................................36
Language ...................................................................................................................................................... 37
Display settings ...........................................................................................................................................38
Background ..................................................................................................................................................38
Deactivating barista recipes ......................................................................................................................39
Querying information ................................................................................................................................39
3
Table of contents
5 Maintenance 41
Rinsing the coffee system .........................................................................................................................42
Rinsing the milk system .............................................................................................................................42
Cleaning the milk system ..........................................................................................................................42
Dismantling and rinsing the dual spout .................................................................................................44
Inserting and activating the filter .............................................................................................................46
Changing the filter ......................................................................................................................................47
Cleaning the machine ................................................................................................................................48
Descaling the machine ..............................................................................................................................49
Cleaning the bean container .....................................................................................................................52
Descaling the water tank ...........................................................................................................................52
6 Display messages 53
7 Troubleshooting 55
8 Transport and environmentally friendly disposal 57
Transport/ Emptying the system .............................................................................................................57
Disposal .........................................................................................................................................................57
9 Technical data 58
10 Index 59
11 JURA contact details/ Legal information 64
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
J CAUTION
CAUTION, used with the safety alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to
perform some action.
E
Information and tips to make it even easier to use your GIGA.
‘Espresso’ Display message
J
J DANGER
J WARNING
4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
When using electrical appliances, basic safety precautions shall
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
Z Read all instructions.
Z Do not touch hot surfaces. Use handles or knobs.
Z To protect against fire, electric shock and injury to persons, do
not immerse power cord, plugs, or body of machine in water
or other liquid.
Z Close supervision is necessary when any appliance is used by
or near children.
Z Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
Z Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
Z The use of an accessory attachment not recommended by the
appliance manufacturer may result in fire, electric shock, or
injury to persons.
Z Do not use outdoors.
Z Do not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
Z Do not place on or near a hot gas or electric burner, or in a
heated oven.
Z Always attach plug to appliance first, then plug cord into the
wall outlet. To disconnect, turn any control to ‘OFF’ then
remove plug from wall outlet.
Z Do not use appliance for other than intended use.
Z Use extreme caution when dispensing hot steam, hot water
or hot coffee.
Follow the basic safety
precautions
5
IMPORTANT SAFEGUARDS
This machine is intended for use by specialist or trained staff in busi-
nesses, light industry and agricultural facilities or for commercial use
by non-professionals. It shall only be used for coffee preparation and
to heat milk and water, according to these instructions. Use for any
other purpose will be deemed improper. JURA Elektroapparate AG
cannot accept any responsibility for the consequences of improper
use.
People, including children, who
Z do not have the physical, sensory or mental capabilities to use
the appliance safely or
Z are inexperienced or lack knowledge in how to use the appli-
ance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Z The power cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a long cord.
Z The cord shall be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children
or tripped over.
Z This appliance has a 3-pin grounded plug.
Z Do not modify the plug in any way.
Do NOT use extension cords.
If the user chooses to use an extension cord,
Z the marked electrical rating of the extension cord shall be at
least as great as the electrical rating of the appliance, and
Z if the appliance is of the grounded type, the extension cord
shall be a grounding type 3-wire cord, and
Z the longer cord shall be arranged so that it will not drape over
the counter top or tabletop where it can be pulled on by child-
ren or tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any ser-
vice covers. DO NOT modify the appliance in any way that is not
described in these instructions. NO user serviceable parts included.
Repair MUST be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
Intended use
Special power cord set
instructions
J WARNING
6
IMPORTANT SAFEGUARDS
This appliance is for household use. Any servicing other than clea-
ning and user maintenance shall be performed by an authorized
service representative:
Z Do not immerse base in water or try to disassemble.
Z Do not put the appliance or any individual parts in the dish-
washer.
Z Check voltage to be sure that the voltage indicated on the
name plate complies with your voltage.
Z Never use warm or hot water to fill the water container. Use
cold water only.
Z Keep your hands and the cord away from hot parts of the
appliance during operation.
There is a risk of scalds or burns on the spouts and the cappuccino
frother / nozzle.
Z Keep children away.
Z Do not touch any hot parts. Use the handles or knobs provi-
ded.
Z Ensure that the cappuccino frother / nozzle is correctly fitted
and clean. If incorrectly fitted or if they become blocked, the
cappuccino frother or its parts might come off.
Z Never clean with scouring powders or hard implements.
Z Ensure that the ventilation slats are not covered.
Z Never pull out the drip tray during the brewing process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
Z Never fill instant coffee, chocolate mix etc. into the bean con-
tainer or ground coffee funnel (filler funnel for ground coffee).
It will damage the functioning of the brewing chamber.
Z Never fill sugar coated coffee beans into the bean container.
In case of doubt, call your dealer.
Z Never fill anything other than coffee beans into the bean con-
tainer (no chocolate, no rice, no nuts, no spices, nothing other
than roasted coffee beans).
J CAUTION
NOTICE
NEVER DO
(or you will void your
warranty protection):
7
IMPORTANT SAFEGUARDS
Z Never fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
Z Never fill anything but fresh, cold and clean water into the
water tank, except when decalcifying.
Z Never use mineral or carbonated water. You can use tap water,
bottled water, spring water and reverse osmosis water.
Z Never do anything with the machine which is not described in
these instructions. In case of doubt, call your dealer.
8
Control elements
Control elements
5
6
2
3
8
7
10
15
14
13
9
11
12
4
1
J HOT
J HOT
1 Bean container with aroma
preservation cover
2 Bean container status indicator
3 Water tank cover
4 Water tank
5 Power switch and plug-in power cord
(back of the machine)
6 Coffee grounds container
7 Drip tray
8 Cup platform
9 Filler funnel for ground coffee
10 Ventilation slats (Venti Ports)
11 Storage compartment cover
12 Measuring spoon for ground coffee
13 Height- and width-adjustable dual spout
14 Splash guard
15 Height-adjustable hot-water spout
9
Control elements
Top of the machine
1 Q On/Off button
2 g Rotary Switch
3 O P button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)
Back of the machine
1 Service cover (open by pressing with your
finger)
2 Locking device
3 Sliding catch
4 Service socket (underneath cover)
10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet.
On the JURA website (www.jura.com) you will find interesting and
up-to-date information on your GIGA and on every aspect of coffee.
The following settings can only be made by the JURA service tech-
nician:
U
Customised layout of the products on the start screen (display)
or in the product selector
U
Disabling the product selector view (see Chapter 2 ‘Prepara-
tion – Preparation using the product selector’)
U
Setting the filter capacity
U
Codes: Four codes can be assigned. For each code, you can
define which program items are available or disabled. Each
code corresponds to different authorisations. For instance,
you can define that initiation of the maintenance programs is
disabled using a code.
You can also obtain the following optional accessories for your GIGA
from your JURA service partner:
U
Set for direct draining of the residual water
U
Set for automatic discharging of coffee grounds
When setting up your GIGA, please note the following:
U
Place the GIGA on a horizontal surface that is not sensitive to
water.
U
Choose a spot for your GIGA which protects the machine
against overheating. Ensure that the ventilation slats are not
covered.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
JURA on the Internet
Settings by the JURA
service technician
Setting up the machine
Filling the water tank
NOTICE
11
1 Preparing and using for the first time
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the tank.
T Close the water tank cover.
The bean containers have an aroma preservation cover. This will
ensure that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
T Remove the aroma preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans and close the aroma
preservation cover.
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective power cord.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4 ‘Per-
manent settings in programming mode – Unit for amount of
water’).
During first-time use, you can choose between the
‘Quick installa-
tion’
and the ‘Standard installation’.
U
‘Quick installation’: After setting the time and date, your GIGA
is ready for use.
U
‘Standard installation’: Here, you can also decide whether you
want to operate your GIGA with or without a CLEARYL Pro
Filling the bean container
NOTICE
First-time use
J WARNING
12
1 Preparing and using for the first time
Blue filter cartridge. If the water hardness is 10°dH or more,
we recommend using the filter cartridge. If you do not know
the hardness of your water, you can find this out first (see
Chapter 1 ‘Preparing and using for the first time – Determin-
ing the water hardness’).
U
‘Use filter’/ ‘Active’: Here, you can fit the CLEARYL Pro Blue
filter cartridge. Descaling will no longer be necessary.
U
‘Use filter’/ ‘Inactive’: Here, you can set the water hardness
of the water used. This setting influences when your GIGA
prompts you to perform descaling.
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
power cord.
Precondition:The water tank and bean containers have been filled.
T Connect the power cord to the machine.
T Insert the power plug into a power socket.
3 T Switch on the GIGA using the power switch on the back of
the machine.
Q T Press the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The display then
shows the languages you can choose from.
E To display more languages, press the
‘Next’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘First-time use’
E Now choose between ‘Quick installation’ and ‘Standard instal-
lation’
.
T Press the
‘Quick installation’ button.
‘Time’
T Press the ‘+’ or ‘–’ button to set the hours.
T Press the
‘Save’ button.
J
WARNING
Quick installation
13
1 Preparing and using for the first time
T Press the ‘+’ or ‘–’ button to set the minutes.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Date’
T Press the ‘+’ or ‘–’ button to set the day.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the month.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the year.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
‘System is filling.’, the system fills up with water. The opera-
tion stops automatically.
‘Welcome to JURA’, ‘Machine is
heating.’
, ‘Press the Rotary Switch.’ appears on the display.
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
T Press the
‘Standard installation’ button.
‘Time’
T Press the ‘+’ or ‘–’ button to set the hours.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the minutes.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Date’
T Press the ‘+’ or ‘–’ button to set the day.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the month.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the year.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Use filter’
Standard installation
14
1 Preparing and using for the first time
E Now decide whether you want to operate your GIGA with or
without a CLEARYL Pro Blue filter cartridge.
T Press the
‘Active’ button.
T Press the
‘Save’ button.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
k T Press the Rotary Switch.
‘System is filling.’, the system fills up with water. The opera-
tion stops automatically.
‘Insert filter.’/ ‘Press the Rotary Switch.’
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the tank.
k T Press the Rotary Switch.
‘Filter is being rinsed.’, the filter is rinsed. Rinsing of the filter
stops automatically.
‘Empty drip tray.’ appears on the dis-
play.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Filter’/ ‘Filter rinsing complete.’
‘Welcome to JURA’
, ‘Machine is heating.’, ‘Press the Rotary
Switch.’
.
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
T Press the
‘Inactive’ button.
T Press the
‘Save’ button.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
k T Press the Rotary Switch.
‘System is filling.’, the system fills up with water. The opera-
tion stops automatically.
‘Water hardness’
Activating the filter
Deactivating the filter
15
1 Preparing and using for the first time
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the
‘+’ or ‘–’ button to adjust the water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Welcome to JURA’, ‘Machine is heating.’, ‘Press the Rotary
Switch.’
.
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
T You will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
Determining the water
hardness
16
1 Preparing and using for the first time
Your GIGA creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 39–46 °F (4–8 °C). We would therefore rec-
ommend using a milk cooler (e.g. the JURA Compressor Cooler Pro,
which is available as an option).
T Connect the milk pipe to the dual spout.To do this, attach
the end of the milk pipe to the connector on the right-hand
side of the dual spout.
T Connect the other end of the milk pipe to a milk cooler.
Connecting milk
17
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
E While a product is being prepared, you can stop preparation
at any time. To do this, press the Rotary Switch k or the
‘’
button.
E During preparation, you can change the preset amounts
(e.g. amount of milk foam or water) by turning the Rotary
Switch g.
E You can follow the current status of preparation on the display.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4 ‘Per-
manent settings in programming mode – Unit for amount of
water’).
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend pre-
warming the cups. The full coffee aroma can develop only in pre-
warmed cups. You can purchase a JURA cup warmer from your spe-
cialized dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
The GIGA provides you with two options for preparing a specialty
coffee, milk or hot water.
U
Preparation at the touch of a button: Simply press the cor-
responding preparation button for the product shown on the
display (start screen) that you want.
J WARNING
Coffee, latte macchiato
etc.– options for
preparation
18
2 Preparation
U
Preparation using the product selector (Rotary Selection):
Only some of the products you can prepare are shown on the
start screen. As soon as you turn the Rotary Switch, more
products are displayed in a product selector.
U
Turn the Rotary Switch to bring the product you want into
focus. Start preparation by pressing the Rotary Switch or the
‘Prepare’ button.
U
The product selector view disappears automatically after
5seconds if no preparation is started.
The two preparation options will now be described in more detail in
the following sections.
On the display (start screen), you will see eight different products,
which you can prepare by simply pressing the corresponding button.
A specialty coffee displayed on the start screen is always prepared in
the same way.
Example:Proceed as follows to prepare one coffee.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the dual spout.
T Press the
‘Coffee’ button.
Preparation starts.
‘Coffee’ and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Two specialty coffees can always be prepared in the same way: Press
the preparation button you want twice within two seconds.
Your GIGA prepares latte macchiato, cappuccino and other specialty
coffees with milk at the touch of a button. There is no need to move
the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:
‘Please select product:’ is displayed, milk is connected
to the dual spout.
Preparation at the touch
of a button
Specialty coffees at the
touch of a button
Two specialty coffees at the
touch of a button
Specialty coffees with milk
at the touch of a button
19
2 Preparation
T Place a glass under the dual spout.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’ and the various amounts are displayed.
‘Latte macchiato’, the preset amounts of milk and milk foam
flow into the glass.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally.
‘Please select product:’ appears on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning
the milk system’).
As soon as you turn the Rotary Switch, more products are displayed
in a product selector.
E The product selector view disappears automatically after
5seconds if no preparation is started.
Example:Proceed as follows to prepare a milky coffee using the
product selector.
Precondition:
‘Please select product:’ is displayed, milk is connected
to the dual spout.
T Place a cup under the dual spout.
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until the
‘Caffè latte’ product is in
focus.
k T Press the Rotary Switch to start preparation.
The milky coffee is prepared.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Preparation using the
product selector
Preparation of a specialty
coffee using the product
selector
20
2 Preparation
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee,
‘Not enough ground coffee.’ is displayed and
the GIGA stops the operation.
E The desired specialty coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth-
erwise the GIGA stops the operation and is once more ready
for use.
All specialty coffees with ground coffee are prepared following this
model.
Example:Proceed as follows to prepare one coffee using ground
coffee.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the dual spout.
T Open the cover of the filler funnel for ground coffee.
‘Please add ground coffee.’
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel.
‘Please select product:’, the specialty coffees you can prepare
with ground coffee are displayed.
T Press the
‘Coffee’ button.
Preparation starts.
‘Coffee’ and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Ground coffee
21
2 Preparation
Now you too can be a professional barista! You can select the recipes
for 12 delicious coffee creations from the product selector using the
Rotary Switch. The GIGA will guide you through each step of the
preparation process with easy-to-follow text and pictures. Choose
from:
U
Marocchino
U
Pepresso
U
White Cool
U
Flavoured latte macchiato
U
Irish coffee*
U
Café mélange
U
Viennese coffee
U
Winter Magic
U
Shakerato
U
Mango Lassi
U
Red Cool*
U
Summer Fire
Designed to please the eye as well as the taste buds!
(Recipes marked * contain alcohol.)
All barista recipes are prepared following this model.
E The product selector view disappears automatically after
5seconds if no preparation is started.
Example:Proceed as follows to prepare a White Cool.
Precondition:
‘Please select product:’ is displayed.
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until the product
‘White Cool’ is in
focus.
k T Press the Rotary Switch to start preparation.
T Follow the instructions on the display and confirm by press-
ing the
‘Next’ button.
E You can stop preparation at any time by pressing the
‘’ button.
E Just before preparation starts, you are asked which grinder
and therefore which beans you want to use.
E You cannot make any permanent settings for barista recipes.
During preparation, you can however change the coffee
strength and quantities by turning the Rotary Switch g.
Barista recipes at a
glance
Preparing barista recipes
22
2 Preparation
It is easy to make permanent settings for the amounts (amount of
water, amount of milk etc.) according to the cup size for all products
except caffè latte. Adjust the amount once as shown in the following
example. Every time you prepare a drink in the future, this amount
of water will be dispensed.
The permanent settings for adapting the amounts to the cup size
for all products (apart from caffè latte) follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the dual spout.
T Press and hold the
‘Coffee’ button.
‘Coffee’ and the fill volume are displayed.
T Hold the
‘Coffee’ button down until ‘Enough coffee? Press
button.’
appears.
T Release the
‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’ appears on the display.
E You can alter this setting at any time by repeating the above
procedure.
E The amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch k until
‘Enough coffee?
Press button.’
appears.
E You can also permanently set the amount for all specialty cof-
fees, milk and hot water in programming mode (see Chapter 4
‘Permanent settings in programming mode – Product set-
tings’).
Permanently setting
amounts for the cup size
23
2 Preparation
You have the option of configuring the start screen such that the
grinder selection (‘beans à la carte’) is always displayed. Before each
preparation, you can select which grinder is to be used and therefore
which coffee beans are to be used.
E If the grinder selection is activated, you can no longer set the
grinder for the individual products in programming mode (in
the
‘Product settings (2/5)’ program item).
Example:Proceed as follows to activate ‘beans à la carte’ mode.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the
‘Café à la carte’ button.
T Press the
‘Active’ button.
T Press the
‘Saved’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/5)’
O T Press the P button to exit programming mode.
‘Please select product:’
Example:Proceed as follows to prepare a coffee with coffee beans
from the grinder on the left.
Precondition:
‘Please select product:’ is displayed. ‘Beans à la carte’
mode is activated.
T Place a cup under the dual spout.
T Press the
‘+’ button on the left-hand side several times until
the value is set to ‘100%’.
E The grinder selection remains active until the setting is
changed by you, even if the GIGA is switched off in the mean-
time.
T Press the
‘Coffee’ button.
Preparation starts.
‘Coffee’ and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Activating the grinder
selection
Preparation of a specialty
coffee with grinder
selection
24
2 Preparation
The following temperatures can be selected for preparing hot water:
‘Low’, ‘Normal’, ‘High’.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the hot-water spout.
T Press the
‘Hot water’ button.
‘Hot water’ and the temperature are displayed.
E By pressing the
‘+’ or ‘–’ button (within approximately
2 seconds) you can set the temperature to your individual
preference. This setting is not saved.
‘Hot water’, hot water flows into the cup. Preparation stops
automatically when the preset amount of water is reached.
‘Please select product:’ appears on the display.
Hot water
J
CAUTION
25
3 Daily operation
3 Daily operation
When the GIGA is switched on, it automatically prompts you to per-
form the rinse operation. Start the rinse operation by pressing the
Rotary Switchk. In programming mode you can change this setting
so that the machine starts the switch-on rinse automatically (see
Chapter 4 ‘Permanent settings in programming mode – Mainte-
nance settings’).
Precondition:Your GIGA is switched on at the power switch.
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Press the Rotary Switch.’
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display.
To ensure that you get many years of reliable service out of your
GIGA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the dual spout (see Chapter 5 ‘Mainte-
nance – Dismantling and rinsing the dual spout’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfiber cloth).
E In the interests of hygiene, we recommend changing the milk
pipe on a regular basis (approx. every 3 months). Replacement
pipes are available from specialized dealers.
Switching on
Daily maintenance
26
3 Daily operation
When you switch off your GIGA, the dual spout is rinsed automati-
cally.
Precondition:
‘Please select product:’ is displayed.
T Place a receptacle under the dual spout.
Q T Press the On/Off button.
‘Machine is rinsing.’, ‘Milk system is being rinsed.’ (if you
have prepared a specialty coffee with milk). The system
rinses itself. The operation stops automatically. Your GIGA is
switched off.
E When the GIGA is switched off with the On/Off button, the
machine consumes less than 0.1 W of standby energy. The
machine can be completely disconnected from the power grid
using the power switch.
Switching off
27
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the P button to enter programming mode. You can navigate
through the program items and permanently save the required set-
tings simply by turning the Rotary Switch and using the multi-func-
tion buttons. The following settings can be made:
Program item Sub-item Explanation
‘Maintenance status (1/5)’ ‘Clean’,
‘Change the filter’,
‘Descale’ (only if filter is
not activated),
‘Rinse the milk system’,
‘Rinse the coffee system’,
‘Clean the milk system’
T Start the required maintenance program
here.
‘Product settings (2/5)’ ‘Expert mode’,
‘Set consistency of grind’
T Select your settings for specialty coffees,
milk and hot water.
T Adjust the consistency of grind for both
grinders to the coffee beans used.
‘Machine settings (3/5)’ ‘Maintenance settings’
(filter, water hardness,
switch-on rinse, milk
system rinsing),
‘Time/ date’,
‘Timer’,
‘Save energy’,
‘Units’,
‘Factory setting’
T Set the water hardness or activate the
filter.
T Change the settings for the switch-on
rinse and milk system rinse.
T Set the time after which the GIGA should
switch off automatically.
T Select an energy-saving mode.
T Select the unit for the amount of water.
T Reset the machine or the permanently
set values of all products to the factory
settings.
J WARNING
Possible settings in
programming mode
28
4 Permanent settings in programming mode
Program item Sub-item Explanation
‘Machine settings (4/5)’ ‘Choose language’,
‘Display’,
‘Colour scheme’,
‘Café à la carte’,
‘Barista recipes’
T Select your language.
T Change the display settings.
T Activate the grinder selection.
‘Information (5/5)’ ‘Product counter’,
‘Day counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all products prepared and
view the number of maintenance
programs performed.
In the program item
‘Product settings (2/5)’ you can make individual
settings for all specialty coffees, milk and hot water.
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
The following settings can be made in the
‘Expert mode’:
Product Coffee strength Amount More settings
Ristretto,
espresso,
coffee
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 0.5 oz – 8.0 oz
(25ml–240ml)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Two ristretti,
two espressi,
two coffees
– Water: 0.5 oz – 8.0 oz
(25ml–240ml)
(per cup)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Cappuccino,
caffè latte,
espresso mac chiato,
latte macchiato
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 0.5 oz – 8.0 oz
(25ml–240ml)
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Product settings
J WARNING
Expert mode
29
4 Permanent settings in programming mode
Product Coffee strength Amount More settings
Two cappuccini,
two caffè lattes,
two espressi
macchiati,
two latte macchiati
– Water: 0.5 oz – 8.0 oz
(25ml–240ml)
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
(per cup)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Portion of milk
foam,
portion of milk
– Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
–
Two portions of
milk foam,
two portions of
milk
– Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
(per cup)
–
Pot
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water:
0.5 oz – 8.0 oz
(25ml–240ml)
(per stroke)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%),
number of strokes (1 – 5;
set number is displayed
during preparation)
Hot water – Water: 0.5 oz – 15.0 oz
(25 ml – 450 ml)
Temperature (low, normal,
high)
E In addition to the settings listed, you can reset the values for
all products to the factory settings.
Example:Proceed as follows in the
‘Expert mode’ to change the
amount of milk for a latte macchiato from
‘4sec.’ to ‘6sec.’, the
amount of milk foam from
‘12sec.’ to ‘14sec.’ and the amount of
water from
‘1.5 oz’ (45 ml) to ‘1.0 oz’ (40 ml).
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’
is displayed.
T Press the
‘Expert mode’ button.
‘Expert mode’
30
4 Permanent settings in programming mode
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the
‘Latte macchiato’ button.
T Press the
‘Amount of milk’ button.
T Press the
‘+’ or ‘–’ button to change setting for the amount
of milk to
‘6sec.’.
T Press the
‘Save’ button.
T Press the
‘Amount of milk foam’ button.
T Press the
‘+’ or ‘–’ button to change setting for the amount
of milk foam to
‘14sec.’.
T Press the
‘Save’ button.
T Press the
‘Volume’ button.
T Press the
‘+’ or ‘–’ button to change setting for the fill vol-
ume to
‘1.0 oz’ (40 ml).
T Press the
‘Save’ button.
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Product settings (2/5)’/ ‘Set consistency of
grind’
you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind setting is correct if the coffee flows regu-
larly from the dual spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’
is displayed.
T Press the
‘Set consistency of grind’ button.
‘Set consistency of grind’
T Press the ‘Right grinder’ button.
‘Right grinder’
T Press the ‘+’ or ‘–’ button to change the setting for the con-
sistency of grind.
Setting the consistency
of grind
31
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Set consistency of grind’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings (3/5)’/ ‘Maintenance settings’
you can make the following settings:
U
‘Filter’
U
Activate the CLEARYL Pro Blue filter cartridge (see Chapter 5
‘Maintenance – Inserting and activating the filter’).
U
‘Water hardness’
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Setting the water hardness’).
U
‘Switch-on rinse’/ ‘Manual’
U
The switch-on rinse must be started manually.
U
‘Switch-on rinse’/ ‘Automatic’
U
The switch-on rinse is started automatically.
U
‘Rinse the milk system’/ ‘Manual after 10min.’
U
You are prompted to rinse the milk system 10minutes after
preparation of a specialty coffee with milk.
U
‘Rinse the milk system’/ ‘Manual immediate’
U
You are prompted to rinse the milk system immediately
after preparation of a specialty coffee with milk.
U
‘Rinse the milk system’/ ‘Automatic after 10min.’
U
Milk system rinsing is automatically initiated 10 minutes
after preparation of a specialty coffee with milk.
U
‘Rinse the milk system’/ ‘Automatic immediate’
U
Milk system rinsing is automatically initiated approx. 30 sec-
onds after preparation of a specialty coffee with milk.
Example:Proceed as follows to make the machine prompt you to
rinse the milk system immediately after preparing a specialty coffee
with milk.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
Maintenance settings
32
4 Permanent settings in programming mode
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Maintenance settings’ button.
‘Maintenance settings’
T Press the ‘Rinse the milk system’ button.
‘Rinse the milk system’
T Press the ‘Manual immediate’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings’
O T Press the P button to exit programming mode.
‘Please select product:’
The harder the water is, the more frequently the GIGA needs to be
descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Maintenance settings’ button.
‘Maintenance settings’
T Press the ‘Water hardness’ button.
‘Water hardness’
T Press the ‘+’ or ‘–’ button to set the water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings’
O T Press the P button to exit programming mode.
‘Please select product:’
Setting the water
hardness
33
4 Permanent settings in programming mode
In the program item ‘Machine settings (3/5)’/ ‘Save energy’ you can
permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
‘Save No’
U
All specialty coffees, specialty coffees with milk and hot water
can be prepared without having to wait.
U
‘Save Level1’
U
Your GIGA is only constantly ready for use for specialty cof-
fees and hot water.
U
Before you can prepare a specialty coffee with milk, the
machine must heat up.
U
‘Save Level2’
U
Soon after the last preparation, the GIGA stops heating up.
After about 5 minutes the message
‘Energy Save’ is displayed.
U
Before you can prepare a specialty coffee, specialty coffee
with milk, or hot water, the machine must heat up.
Example: Proceed as follows to change the energy-saving mode
from
‘Save Level1’ to ‘Save Level2’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Save energy’ button.
‘Save energy’
T Press the ‘Save Level2’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (3/5)’
O T Press the P button to exit programming mode.
‘Please select product:’
You already set the time and date during first-time use. You can
change this setting.
E For the time format, you can choose between ‘24hrs’ and
‘AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Units’).
Energy-saving mode
Time and date
34
4 Permanent settings in programming mode
Example:Proceed as follows to change the time.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Time/ date’ button.
‘Time/ date’
T Press the ‘Time’ button.
‘Time’
T Press the ‘+’ or ‘–’ button to set the hours.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the minutes.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Time/ date’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings (3/5)’/ ‘Timer’ you can set an
individual switch-on and switch-off time for every day of the week.
E Automatic switch-on only works when the machine is switched
on at the power switch.
E For the time format, you can choose between ‘24hrs’ and
‘AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Units’).
Example:Proceed as follows to set your GIGA to switch on and off
at a time defined by you every day of the week.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Timer’ button.
‘Timer’
T Press the ‘Monday’ button (example).
‘Monday’
Timer
35
4 Permanent settings in programming mode
T Press the ‘+’ or ‘–’ button to set the hours (for ‘Switch
machine on’
).
T Press the
‘’ button.
T Press the
‘+’ or ‘–’ button to set the minutes (for ‘Switch
machine on’
).
T Press the
‘’ button.
T Press the
‘+’ or ‘–’ button to set the hours (for ‘Switch
machine off’
).
T Press the
‘’ button.
T Press the
‘+’ or ‘–’ button to set the minutes (for ‘Switch
machine off’
).
T Press the
‘Every weekday’ button.
‘Saved’ appears briefly on the display. The switch-on and
switch-off times you just set are adopted for every day of the
week.
‘Timer’
O T Press the P button to exit programming mode.
‘Please select product:’
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off time to 15minutes or
0.5 – 15 hours.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Timer’ button.
T Press the
‘Next’ button.
T Press the
‘Switch off after’ button.
‘Switch off after’
T Press the ‘+’ or ‘–’ button to change the setting.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Timer’
Automatic switch-off
36
4 Permanent settings in programming mode
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings (3/5)’/ ‘Units’ you can make
the following settings:
U
Unit for amount of water: ‘ml’ or ‘oz’
U
Time format: ‘24hrs.’ or ‘AM/ PM’
Example:Proceed as follows to change the unit for the amount of
water from
‘ml’ to ‘oz’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (3/5)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings (3/5)’/ ‘Factory setting’ you
can reset various settings to their factory settings:
U
‘All products’
U
The settings (amount of water, coffee strength, temperature
etc.) for all products are reset to the factory settings.
U
‘Machine’
U
All user settings (apart from the ‘filter’, ‘water hardness’ and
time and date settings) are reset to the factory settings. The
GIGA then switches off.
U
‘Empty system’
U
The system is emptied. Your GIGA then switches off.
Example:Proceed as follows to reset the values for all products to
the factory settings.
Precondition:
‘Please select product:’ is displayed.
Units
Restore factory settings
37
4 Permanent settings in programming mode
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘All products’ button.
‘All products’/ ‘Reset all products to the factory settings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
O T Press the P button to exit programming mode.
‘Please select product:’
In this program item you can set the language used by your GIGA.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘Next’ button (bottom
right).
T Press the
‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen (4/5)’
O T Press the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
Language
38
4 Permanent settings in programming mode
In the program item ‘Machine settings (4/5)’/ ‘Display’ you can make
the following settings:
U
‘Brightness’ (as percentages)
U
‘Contrast’ (high, normal, low)
U
‘Backlight’ (backlighting; as percentages)
Example:Proceed as follows to change the brightness of the display.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the
‘Display’ button.
‘Display’
T Press the ‘Brightness’ button.
T Press the
‘+’ or ‘–’ button to change the setting.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Display’
O T Press the P button to exit programming mode.
‘Please select product:’
In this program item you can set the background for the display of
your GIGA.
E The set background is only displayed on the start screen.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the
‘Colour scheme’ button.
‘Colour scheme’
T Press the ‘+’ or ‘–’ button to change the setting.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/5)’
O T Press the P button to exit programming mode.
‘Please select product:’
Display settings
Background
39
4 Permanent settings in programming mode
In the program item ‘Machine settings (4/5)’ you can activate or
deactivate the barista recipes. When the barista recipes are deacti-
vated they no longer appear in the product selector.
Example:Proceed as follows to deactivate barista recipes.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until ‘Machine settings (4/5)’ is dis-
played.
T Press the
‘Barista recipes’ button.
‘Barista recipes’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/5)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Information (5/5)’ you can view the following
information:
U
‘Product counter’: Number of prepared coffee specialty cof-
fees, specialty coffees with milk and hot water
U
‘Day counter’: Number of prepared coffee specialty coffees,
specialty coffees with milk and hot water. This counter can be
reset to zero.
U
‘Maintenance counter’: Number of maintenance programs
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Information
(5/5)’
is displayed.
T Press the
‘Product counter’ button.
‘Product counter’ and the number of products prepared is
displayed.
Deactivating barista
recipes
Querying information
40
4 Permanent settings in programming mode
E You can also view the number of products prepared in the
product selector. To do this, turn the Rotary Switch.
T Press any button or the Rotary Switch to exit the program
item.
‘Information (5/5)’
O T Press the P button to exit programming mode.
‘Please select product:’
41
5 Maintenance
5 Maintenance
Use of maintenance products that are harmful to health and dis-
charge of liquids during maintenance program. Harmful if swal-
lowed. Irritating to eyes and skin.
T Keep children AWAY.
T Keep children away from the machine while it is performing a
maintenance program.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T When using do not eat or drink.
T Keep maintenance products away from food, drink and ani-
mal food.
T Keep container tightly closed and dry. Keep in a cool place.
Your GIGA has the following integrated maintenance programs:
U
Rinsing the coffee system (‘Rinse the coffee system’)
U
Rinsing the milk system in the dual spout (‘Rinse the milk
system’
)
U
Cleaning the milk system in the dual spout (‘Clean the milk
system’
)
U
Changing the filter (‘Change the filter’)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’) (only if filter is not activated)
E Clean or descale the machine, rinse the milk system or change
the filter when you are prompted to do so.
E Press the P button to view a list of the maintenance programs
(
‘Maintenance status (1/5)’). By referring to the bar you can see
how soon each maintenance program is due. When the bar is
completely filled with red, your GIGA will prompt you to per-
form the maintenance program.
E The GIGA will not prompt you to clean the milk system. In the
interests of hygiene, you should clean the milk system daily
when you have been preparing milk.
J WARNING
42
5 Maintenance
You can perform coffee system rinsing at any time.
Precondition:
‘Please select product:’ is displayed.
T Place a receptacle under the dual spout.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Rinse the coffee system’ button.
‘Machine is rinsing.’, water flows out of the dual spout.
The rinse stops automatically.
‘Please select product:’ appears
on the display.
Depending on the setting in programming mode, the GIGA prompts
you to rinse the milk system or automatically performs rinsing fol-
lowing milk preparation.
Example:Proceed as follows to rinse the milk system when prompted
to do so.
Precondition:
‘Rinse the milk system.’ and the c symbol are dis-
played.
T Place a receptacle under the dual spout.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Rinse the milk system’ button.
‘Milk system is being rinsed.’, water flows out of the dual
spout.
The rinse stops automatically.
‘Please select product:’ appears
on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk. The
GIGA will not prompt you to clean the milk system.
Non-recommended cleaning agents will not optimally remove milk
residues. This may cause the cappuccino frother to become blocked
and fly off the machine. Discharge of hot steam.
T Use only original JURA milk system cleaner.
Rinsing the coffee system
Rinsing the milk system
Cleaning the milk system
J WARNING
43
5 Maintenance
Harmful and irritating cleaning agent. Harmful if swallowed. Irritat-
ing to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice.
T If swallowed, rinse mouth immediately and drink large quan-
tities of water. Do not induce vomiting. Seek medical advice
immediately and show label.
E JURA milk system cleaner is available from specialized dealers.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Clean the milk system’ button.
T Press the
‘Start’ button.
T Press the
‘Start’ button again.
‘Cleaning agent for milk system.’
T Pour 8.5 oz (250 ml) of fresh water into a receptacle and add
one capful (max. 0.5 oz (15 ml)) of milk system cleaner.
T Immerse the milk pipe in the receptacle.
T Place another receptacle under the dual spout.
T Press the
‘Next’ button.
‘Milk system is being cleaned.’, water flows out of the dual
spout.
‘Water for cleaning milk system.’
T Rinse the receptacle thoroughly, fill it with 8.5 oz (250 ml) of
fresh water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the dual spout
again.
T Press the
‘Next’ button.
‘Milk system is being cleaned.’, the dual spout and the pipe
are rinsed with fresh water.
The operation stops automatically.
‘Milk system cleaning
complete.’
appears briefly on the display.
‘Please select product:’
J WARNING
44
5 Maintenance
The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Press the releasing devices and pull the cover of the dual
spout up and off.
T Carefully pull the bottom part of the milk system down and
off.
T Remove the milk system from the dual spout.
T Remove the air intake pipe.
Dismantling and rinsing
the dual spout
45
5 Maintenance
T Dismantle the milk system into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts in
JURA milk system cleaner and then rinse them thoroughly.
T Reassemble the milk system. When doing this, note the
arrows (circled in red in the picture) on the individual parts.
T Fit the air intake pipe.
T Fit the assembled individual parts back in the dual spout and
press it firmly.
T Attach the bottom part of the milk system to the part already
inserted from below.
46
5 Maintenance
T Fit the cover of the dual spout. It will click into place audibly.
T Insert the milk pipe into the dual spout.
Your GIGA no longer has to be descaled if you are using the CLEARYL
Pro Blue filter cartridge. If the water hardness is 10°dH or more, we
recommend using the filter cartridge. If you do not know the hard-
ness of your water, you can find this out first (see Chapter 1 ‘Prepar-
ing and using for the first time – Determining the water hardness’).
If you did not activate the filter cartridge the first time you used the
machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation without any inter-
ruptions. This will ensure that your GIGA always produces its
best.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Maintenance settings’ button.
T Press the
‘Filter’ button.
‘Filter’
T Press the ‘Active’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter.’/ ‘Press the Rotary Switch.’
Inserting and activating
the filter
47
5 Maintenance
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the tank.
k T Press the Rotary Switch.
‘Filter is being rinsed.’, the filter is rinsed. Rinsing of the filter
stops automatically.
‘Empty drip tray.’ appears on the display.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Filter’/ ‘Filter rinsing complete.’
The machine heats up. ‘Please select product:’ appears on
the display. Your GIGA is once more ready for use.
E After 4060 oz (120liters) of water have flowed through or after
two months, the filter will cease to work. Your GIGA will auto-
matically prompt you to change the filter.
E If the CLEARYL Pro Blue filter cartridge is not activated in
programming mode, you will not be prompted to change the
filter.
Example:Proceed as follows to change the filter when prompted to
do so.
Precondition:
‘Change the filter’ and the c symbol are displayed.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Change the filter’ button.
T Press the
‘Start’ button.
T Press the
‘Start’ button again.
‘Change filter.’/ ‘Press the Rotary Switch.’
T Remove and empty the water tank.
T Open the filter holder and remove the old CLEARYL Pro Blue
filter cartridge.
T Insert the new filter cartridge into the water tank, exerting
slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the tank.
k T Press the Rotary Switch.
‘Filter is being rinsed.’, the filter is rinsed. Rinsing of the filter
stops automatically.
‘Empty drip tray.’ appears on the display.
Changing the filter
48
5 Maintenance
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Change the filter’/ ‘Filter rinsing complete.’
The machine heats up. ‘Please select product:’ appears on
the display.
After 220preparations or 80switch-on rinses, the GIGA will prompt
you to clean it.
Non-recommended (e.g. liquid) cleaning agents may contain sub-
stances that could damage the machine or leave residues.
T Use only original JURA cleaning tablets. These are specially
formulated for your machine.
Harmful and irritating cleaning agent. Harmful if swallowed. Irritat-
ing to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice.
T If swallowed, rinse mouth immediately and drink large quan-
tities of water. Do not induce vomiting. Seek medical advice
immediately and show label.
E The cleaning program lasts approximately 20 minutes.
E Do not interrupt the cleaning program. The quality of cleaning
will be impaired if you do so.
E JURA cleaning tablets are available from specialized dealers.
Example:Proceed as follows to clean when prompted to do so.
Precondition:
‘Clean machine.’ and the c symbol are displayed.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Clean’ button.
T Press the
‘Start’ button.
T Press the
‘Start’ button again.
‘Empty coffee grounds container.’
Cleaning the machine
J WARNING
J WARNING
49
5 Maintenance
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Press the Rotary Switch.’.
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
‘Machine is being cleaned.’, water flows out of the dual spout.
The operation is interrupted,
‘Add cleaning tablet.’.
T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
‘Press the Rotary Switch.’
k T Press the Rotary Switch.
‘Machine is being cleaned.’, water flows out of the dual spout
repeatedly.
The operation is interrupted,
‘Empty coffee grounds con-
tainer.’
.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Clean’/ ‘Cleaning complete.’
Cleaning is now complete. Your GIGA is once more ready for
use.
The GIGA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
Non-recommended descaling agents (e.g. vinegar) may contain
substances that could damage the machine or leave residues.
T Use only original JURA descaling tablets. These are specially
formulated for your machine.
Descaling the machine
J WARNING
50
5 Maintenance
Harmful and irritating descaling agent. Harmful if swallowed. Irritat-
ing to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water.
Remove contact lenses. Seek medical advice.
T If swallowed, rinse mouth immediately and drink large quan-
tities of water. Do not induce vomiting. Seek medical advice
immediately and show label.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling program to run to the end.
E The descaling program lasts approximately 50minutes.
E JURA descaling tablets are available from specialized dealers.
E If you use a CLEARYL Pro Blue filter cartridge and this is
activated, you will not be prompted to descale.
E If the descaling agent comes into contact with sensitive sur-
faces (e.g. marble), damage cannot be ruled out. Clean up any
splashes immediately.
Example:Proceed as follows to perform descaling when prompted
to do so.
Precondition:
‘Decalcify machine.’ and the c symbol are displayed.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Descale’ button.
T Press the
‘Start’ button.
T Press the
‘Start’ button again.
‘Empty drip tray.’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Pour descaling agent into water tank.’
T Remove and empty the water tank.
J WARNING J WARNING
NOTICE
51
5 Maintenance
T Completely dissolve 4JURA descaling tablets in a receptacle
holding 27 oz (800ml) of water. This may take several min-
utes.
T Pour the solution into the empty water tank and insert it into
the machine.
‘Press the Rotary Switch.’
T Place one receptacle under the dual spout and another
under the hot-water spout.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows repeatedly out of
the dual spout and the hot-water spout.
The operation stops automatically.
‘Empty drip tray.’ appears
on the display.
T Empty both receptacles.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank.’
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the tank.
‘Press the Rotary Switch.’
T Place the receptacles back under the dual spout and the hot-
water spout.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows out of the dual
spout and the hot-water spout.
The operation stops automatically.
‘Empty drip tray.’ appears
on the display.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Descale’/ ‘Descaling complete.’
Descaling is now complete. Your GIGA is once more ready
for use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
52
5 Maintenance
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean containers. These traces may negatively affect
the coffee result. For this reason clean the bean containers from time
to time.
Precondition:
‘Fill bean container.’ is displayed.
Q T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
T Open the service cover on the back of the machine by press-
ing above the JURA logo.
T Push the red sliding catch completely to the rear to close the
bean container.
T Turn the blue locking device outwards.
T Remove the bean container.
T Remove the aroma preservation cover.
T Empty the bean container.
T Clean the bean container with a soft, dry cloth.
T Fit the bean container.
T Turn the blue locking device inwards.
T Pull the red sliding catch completely forwards.
T Refit the service cover and fix it by pressing above the JURA
logo. It will click into place audibly.
T Fill the bean container with coffee beans and close the aroma
preservation cover.
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
T Remove the water tank.
T If you use a CLEARYL Pro Blue filter cartridge, remove this.
T Descale the tank with a mild conventional descaling agent
in accordance with the manufacturer's instructions.
T Rinse out the water tank thoroughly.
T If you use a CLEARYL Pro Blue filter cartridge, insert this
again.
T Fill the water tank with fresh, cold water and reinsert the tank.
Cleaning the bean
container
Descaling the water tank
53
6 Display messages
6 Display messages
Message Cause/Result Action
‘Fill water tank.’ The water tank is empty. You cannot
prepare any products.
T Fill the water tank (see Chapter 1
‘Preparing and using for the first
time – Filling the water tank’).
‘Empty coffee
grounds container.’
The coffee grounds container is full.
You cannot prepare any products.
T Empty the coffee grounds
container and the drip tray (see
Chapter 3 ‘Daily operation – Daily
maintenance’).
‘Coffee grounds
container not fitted.’
The coffee grounds container is not
fitted. You cannot prepare any
products.
T Fit the coffee grounds container.
‘Empty drip tray.’ The drip tray is full. You cannot
prepare any products.
T Empty the drip tray.
T Clean and dry the metal contacts
on the back of the drip tray.
‘Drip tray not fitted.’ The drip tray is not inserted correctly
or is not inserted at all. You cannot
prepare any products.
T Fit the drip tray.
‘Press the Rotary
Switch.’
The system must be filled with water
or the GIGA prompts you to continue
a started maintenance program.
T Turn the Rotary Switch to
continue with the maintenance
program or to fill the system.
‘Fill bean container.’,
the bean container
status indicator
flashes.
One of the bean containers is empty.
You cannot prepare any specialty
coffees for which coffee beans are
required from this bean container.
You can prepare hot water or milk.
T Fill the bean container (see
Chapter 1 ‘Preparing and using for
the first time – Filling the bean
container’).
‘Rinse the milk
system.’
The GIGA is prompting you to rinse
the milk system.
T Press the P button and then the
‘Rinse the milk system’ button to
initiate milk system rinsing.
‘Clean machine.’ The GIGA is prompting you to clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the
machine’).
‘Decalcify machine.’ The GIGA is prompting you to descale
it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine ’).
54
6 Display messages
Message Cause/Result Action
‘Change filter.’ After 4060 oz (120liters) of water
have flowed through the CLEARYL
Pro Blue filter cartridge or after two
months, it will cease to work.
T Replace the CLEARYL Pro Blue
filter cartridge (see Chapter 5
‘Maintenance – Changing the
filter’).
‘Spout is not fitted.’ The dual spout or the cover of the
dual spout is not fitted correctly.
T Fit the cover of the dual spout or
the dual spout correctly.
‘Not enough ground
coffee.’
There is insufficient ground coffee
in the machine; the GIGA stops the
operation.
T The next time you prepare a
beverage, add more ground coffee
(see Chapter 2 ‘Preparation –
Ground coffee’).
‘Service cover is not
fitted.’
The service cover on the back of the
machine is not fitted. You cannot
prepare any products.
T Fit the service cover.
‘Please check the
ventilation slats.’
The ventilation slats on the surface
of the machine cannot be opened.
You cannot prepare any products.
T Contact customer support in
your country (see Chapter 11
‘JURA contact details/ Legal
information’).
55
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
Insufficient foam is
produced when the milk
is frothed, or milk sprays
from the dual spout.
The dual spout is dirty.
T Rinse and clean the dual spout (see
Chapter 5 ‘Maintenance – Cleaning the
milk system’).
Coffee only comes out in
drips when it is being
prepared.
Coffee or ground coffee has
been ground too finely and
is blocking the system.
The same filter cartridge
may have been used
several times or the water
hardness set incorrectly in
the programming mode.
T Put the grinder on a coarser setting or
use coarser ground coffee (see Chapter 4
‘Permanent settings in programming
mode – Setting the consistency of
grind’).
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine’).
‘Fill bean container.’ is
not displayed although
the bean container is
empty.
The bean monitor is dirty.
T Clean the bean container (see
Chapter 5 ‘Maintenance – Cleaning the
bean container’).
Preparation stops,
‘Fill
bean container.’
is briefly
displayed although the
bean container has been
filled.
The sliding catch for the
bean container has not
been pulled out or has not
been pulled out completely.
T Open the service cover on the back of
the machine and pull the sliding catch
all the way out (see Chapter 5 ‘Mainte-
nance – Cleaning the bean container’).
‘Empty drip tray.’ is
always displayed.
The metal contacts of the
drip tray are dirty or wet.
T Clean and dry the metal contacts on
the back of the drip tray.
‘Fill water tank.’ is
displayed although the
water tank is full.
The water tank float is
trapped.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water
tank’).
‘Error 2’ is displayed. If the machine was exposed
to the cold for a long
period of time, heating is
disabled for safety reasons.
T Warm the machine at room tempera-
ture.
56
7 Troubleshooting
Problem Cause/Result Action
Other
‘Error’ messages
are displayed.
–
T Switch the GIGA off at the power
switch. Contact customer support in
your country (see Chapter 11 ‘JURA
contact details/ Legal information’).
E If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details/
Legal information’).
57
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
In order to protect the GIGA from frost during transport, the system
must be emptied.
Precondition:‘Please select product:’ is displayed.
T Place one receptacle under the dual spout and another under
the hot-water spout.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘Empty system’ button.
‘Empty system’/ ‘Remove the water tank.’
T Remove and empty the water tank.
‘Press the Rotary Switch.’
k T Press the Rotary Switch.
‘System is emptying.’, water flows out of the dual spout and
the hot-water spout.
The operation stops automatically. Your GIGA is switched off.
Please dispose of old machines in an environmentally neutral way.
H
Transport/ Emptying the
system
Disposal
58
9 Technical data
9 Technical data
Voltage 120V~, 60Hz
Power 1250W
Airborne noise emitted L
P<70dB (A)
Ambient conditions Humidity max. 80 %
Ambient temperature
50 – 95°F
(10 – 35°C)
Conformity mark
Energy consumption
‘Save energy’/ ‘Save No’
Approx. 30Wh
Energy consumption
‘Save energy’/ ‘Save Level1’
Approx. 12Wh
Energy consumption
‘Save energy’/ ‘Save Level2’
Approx. 15Wh
Pump pressure Static, max. 15bar
Holding capacity of water tank 169 oz (5l)
Holding capacity of bean container 2 23 oz (2 650g)
Holding capacity of coffee grounds
container
Max. 40portions
Cord length Approx. 59in.
(Approx. 1.5m)
Weight Approx. 40 lb
(Approx. 18.9kg)
Dimensions (WHD) 14.6 × 22.2 × 19.6 in.
(37 57 48cm)
The machine complies with the following directives:
U
Standard UL 1082
U
Canadian Standard CSA C22.2 No. 64
Information for testers (repeat test in accordance with DIN VDE
0701-0702): The central grounding point (CGP) is located on the
front of the machine below the JURA logo (turn JURA logo anti-clock-
wise).
Directives
59
10 Index
10 Index
A
Addresses 64
Aroma preservation cover
Bean container with aroma preservation
cover 8
Automatic switch-off 34, 35
Automatic switch-on 34
B
Background 38
Bean container
Bean container with aroma preservation
cover 8
Cleaning 52
Filling 11
Status indicator 8
Bean container status indicator 8
Beans à la carte
Activating the grinder selection 23
Bus bar
Technical data 58
Button
On/Off button 9
P button (programming) 9
C
Cappuccino 17
Cappuccino frother cleaning
Cleaning the milk system 42
Cappuccino frother rinsing
Rinsing the milk system 42
Cleaning
Bean container 52
Machine 48
CLEARYL Pro Blue filter cartridge
Changing 47
Inserting and activating the filter 46
Coffee 17
Coffee à la carte 17
Coffee grounds container 8
Consistency of grind
Setting the consistency of grind 30
Contact details 64
Cover
Service cover 9
Water tank 8
Cup platform 8
Customer support 64
D
Date 33
Descaling
Machine 49
Water tank 52
Display 9
Display messages 53
Display settings 38
Disposal 57
Double product 18
Drip tray 8
Dual spout
Dismantling and cleaning 44
Height- and width-adjustable dual spout
8
E
Emptying the system 57
Energy-saving mode 33
Errors
Troubleshooting 55
Espresso 17
Expert mode 28
F
Factory settings
Restore factory settings 36
Filler funnel
Filler funnel for ground coffee 8
Filling
Bean container 11
Water tank 10
Filter
Changing 47
Inserting and activating the filter 46
First-time use 11
G
Grinder
Activating the grinder selection 23
Setting the consistency of grind 30
Ground coffee 20
60
10 Index
H
Hotline 64
Hot water 24
Hot-water spout
Height-adjustable hot-water spout 8
I
Important safeguards
Safety 4
Instant coffee
Ground coffee 20
Internet 10
J
JURA
Contact details 64
Internet 10
L
Language 37
Latte macchiato 17
Locking device 9
M
Machine
Cleaning 48
Descaling 49
Rinsing the coffee system 42
Setting up 10
Switching off 26
Switching on 25
Maintenance
Daily maintenance 25
Maintenance 41
Maintenance settings 31
Messages, display 53
Milk
Connecting milk 16
Milk system
Cleaning 42
Rinsing 42
P
Permanently setting amounts for the cup
size 22
Permanent settings in programming mode
27
Power cord 8
Power switch 8
Preparation 17
At the touch of a button 18
Cappuccino 17
Coffee 17
Espresso 17
Ground coffee 20
Hot water 24
Latte macchiato 17
Ristretto 17
Two specialty coffees 18
Using the product selector 19
Preparation options 17
At the touch of a button 18
Using the product selector 19
Problems
Troubleshooting 55
Product selector 17, 19
Product settings 28
Expert mode 28
Programming mode 27
Automatic switch-off 35
Background 38
Display settings 38
Energy-saving mode 33
Language 37
Maintenance settings 31
Product settings 28
Querying information 39
Restore factory settings 36
Setting the consistency of grind 30
Setting the water hardness 32
Time and date 33
Timer 34
Units 36
Q
Querying information 39
Quick installation 12
Quick mode 28
R
Rinsing the coffee system 42
Ristretto 17
Rotary Selection 17
Product selector 19
Rotary Switch 9
61
10 Index
S
Safety
Important safeguards 4
Service cover 9
Service socket 9
Settings
Maintenance settings 31
Permanent settings in programming
mode 27
Setting up
Setting up the machine 10
Sliding catch 9
Splash guard 8
Spout
Height-adjustable hot-water spout 8
Height- and width-adjustable dual spout
8
Standard installation 13
Switching off
Machine 26
Switching on
Machine 25
Switch-off
Automatic switch-off 34, 35
Switch-off time 34
Switch-on
Automatic switch-on 34
Switch-on time 34
Symbol description 3
T
Technical data 58
Tel 64
Time 33
Time format
Programming mode 36
Timer 34
Transport 57
Troubleshooting 55
Two products 18
U
Units 36
Use, First-time 11
V
Ventilation slats 8
Venti Ports
Ventilation slats 8
W
Water hardness
Determining the water hardness 15
Setting the water hardness 32
Water tank 8
Descaling 52
Filling 10
Website 10
62
– intentionally blank –
63
– intentionally blank –
64
11 JURA contact details/ Legal information
11 JURA contact details/ Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Switzerland
USA: JURA Inc.
Canada: FAEMA
Customer Service
Phone
E-Mail
1-800-220-5701
1-(855)-544-8600
info@juracanada.ca
Opening Hours (EST) Mon – Thu 9 am – 9 pm,
Fri 9 am – 8 pm,
Sat 9 am – 5 pm
Distributor Address
Phone
Fax
20 Craig Road
Montvale, NJ 07645
001 (201) 767-3999
001 (201) 767-9684
115 Matheson Boulevard East
Mississauga, Ontario, L4Z 1X8
1-(905)-501-8600
Internet www.us.jura.com www.ca.jura.com
@ You will find additional contact details for your country at
www.jura.com.
We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colors of the machine. Some details of
your GIGA may vary.
Your opinion is important to us! Use the contact details at
www.jura.com.
The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.
Headquarters
Technical changes
Feedback
Copyright
J70462/GIGA X7/US-en/201607
