Loading ...
Loading ...
Loading ...
34
EN
Set the dial mode
1
Press MENU/OK.
2
Select [Services] > [Dial mode], then
press MENU/OK to conrm.
3
Select a dial mode, then press MENU/OK
to conrm.
» The setting is saved.
Note
• If your phone is in pulse dial mode, press during a
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.
Auto clock
Note
• This service is network dependent.
• Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Press MENU/OK.
2
Select [Services] > [Auto clock], then
press MENU/OK to conrm.
3
Select [On]/[Off] . Press MENU/OK.
» The setting is saved.
Register additional handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1
Press MENU/OK on the handset.
2
Select [Services] > [Register], then press
MENU/OK to conrm.
3
Press and hold on the base station for
5 seconds.
4
Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to conrm the PIN.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
• If the PIN is incorrect or no base is found within a
certain period, your handset displays a notication
message. Repeat the above procedure if registration
fails.
• The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1
Press MENU/OK.
2
Select [Services] > [Unregister], then
press MENU/OK to conrm.
3
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
4
Select the handset number to be
unregistered.
5
Press MENU/OK to conrm.
» The handset is unregistered.
Tip
• The handset number is displayed beside the handset
name in standby mode.
Loading ...
Loading ...
Loading ...