Loading ...
Loading ...
Loading ...
12
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\04BAS.FM]
masterpage:L1-Left-00
model name1[DSC-P2]
[3-075-509-
11
(1)]
Charging the battery pack (continued)
Charging time
This represents the time required to charge
fully depleted battery pack using the
supplied AC-LS1A AC power adaptor in
an environment where the ambient
temperature is 25°C (77°F).
Battery life and the number of
images that can be recorded/
viewed
The tables show approximate guidelines
for the length of time the camera can be
used when image quality is set to
Standard, when you shoot in Flash mode
“ ”, and when you shoot in Normal
mode in an environment where the
ambient temperature is 25°C (77°F), and
the supplied battery pack is fully charged.
The guidelines for the number of images
that can be recorded or viewed allow for
changing the “Memory Stick” as
necessary. Actual results may differ
slightly from these, depending on the
conditions of use.
Shooting* still images
*
Shooting one image approximately every
three seconds
Viewing** still images
**
With the LCD screen on, viewing single images
in order, one approximately every three seconds
Shooting*** movies
***
Continuous shooting with an image size of
160×112
•
The battery life and the number of images
recordable are decreased under the following
conditions:
–
At low temperatures.
–
Using the flash.
–
Turning on and off frequently.
–
Using the zoom frequently.
–
When [POWER SAVE] is set to [OFF].
–
Using the battery pack used repeatedly or
self-discharged after charging (page 96).
The POWER SAVE function
When the POWER SAVE function is
activated, you can shoot for a longer
period of time.
Set the mode dial to SET UP, and set
[POWER SAVE] in [SETUP 2] to [ON].
The factory setting is [ON] (page 93).
When the POWER SAVE function is
activated
•
The LCD screen will be darker than it is when
[POWER SAVE] is set to [OFF]. You cannot
change the settings for [LCD BACKLIGHT]
at this time (page 93).
•
When the power turns on, the Flash mode is
normally set to “ ” (No flash).
•
If you want to shoot using the flash, press v
( ) on the control button, and select “ ”
(Forced flash) or Auto (page 24).
•
When shooting sill images, the focus only
works while the shutter button is pressed
down halfway.
Battery pack Full charge
(min.)
NP-FC10 (supplied) Approx.150
Image
size
NP-FC10 (supplied)
LCD
screen
Battery
life (min.)
No. of
images
1600×1200
ON Approx. 70 Approx. 1400
OFF Approx. 110 Approx. 2200
640×480
ON Approx. 70 Approx. 1400
OFF Approx. 110 Approx. 2200
Image size
NP-FC10 (supplied)
Battery life
(min.)
No. of images
1600×1200 Approx. 160 Approx. 3200
640×480 Approx. 160 Approx. 3200
NP-FC10 (supplied)
LCD screen ON
(min.)
LCD screen OFF
(min.)
Approx. 90 Approx. 120
01cov.book Page 12 Wednesday, April 3, 2002 11:17 AM
Loading ...
Loading ...
Loading ...