Loading ...
Loading ...
Loading ...
16
To prepare your new machine for initial use, follow
the steps under Normal Cleaning, below. This will
clean the unit and break in the motor.
During your first few uses, you may notice a slight
burning odor as the motor is primed.
This is completely normal and will dissipate quickly.
Normal Cleaning
1. Begin with the Variable Speed Dial pointing at Variable Speed 1.
1. Fill the container half full of warm water. Add a few drops of liquid dish
detergent to the container.
2. Snap or push the complete 2-part lid into the locked position.
3. Press the Start/Stop switch. Slowly increase the Variable Speed to 10.
Run the machine for 30 to 60 seconds. Press the Start/Stop Switch to stop
the machine. Rotate the Variable Speed Dial back to Variable Speed 1.
4. Rinse and drain the container.
To Sanitize:
Always begin with the Variable Speed Dial pointing at Variable Speed 1.
1. Follow the cleaning instructions above.
2. Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into the locked position.
4. Press the Start/Stop switch. Slowly increase the Variable Speed to 10.
Run the machine for 30 to 60 seconds. Press the Start/Stop Switch.
Rotate the Variable Speed Dial back to Variable Speed 1.
5. Allow the mixture to stand in the container for an additional 1 ½ minutes.
6. Pour out bleach mixture. Allow container to air dry.
7. Do not rinse after sanitizing.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash parts in warm, soapy water. Rinse clean
under running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and eective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.
CARE AND CLEANING
Loading ...
Loading ...
Loading ...