Loading ...
Loading ...
Loading ...
15
8. Due to the machine’s speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
9. After pressing the Start/Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Dry-Blade Container
Your dry-blade container should be used only for hard, dry materials, such as
grain, and for kneading dough.
Before using this container, always begin with
the Variable Speed Dial pointing at Variable Speed 1.
1. Load the container before placing it on the motor base.
2. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid plug opening).
3. With the motor o, set the dry-blade container on the motor base by
aligning it over the centering pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
4. To begin, make sure that the On/O switch is in the On (1) position.
5. Activate the machine by pressing the Start/Stop Switch. Your container
will shift and align itself. Slowly increase the Variable Speed to the desired
speed.
6. Due to the machine’s speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
7. After pressing the Start/Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
OPERATING INSTRUCTIONS
CAUTION
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and lid
plug securely in place prior to operating
the machine.
Always start on Variable 1, then slowly
increase to 10.
Loading ...
Loading ...
Loading ...